Legs; Figure 9.4.2.1: Leg Types; Figure 9.4.1.1: Standard Leg Replacement Process - 3DR Solo User Manual

9.4

Legs

Solo uses three unique types of legs: 2 legs with an antenna module (#1 and #2), a leg without any electronic
components (leg #3), and a leg with a compass module (leg #4). Replacements for all types of leg can be purchased
from store.3dr.com or an authorized retailer.
9.4.1 Leg #3
To replace a standard leg, use a #2 Phillips screwdriver to remove the two screws, detach the old leg, and attach
the new leg using the provided screws.
9.4.2 Legs #1 and #2 with Antennas
To replace a leg with an antenna module where the antenna is physically undamaged, you'll need to remove the
antenna from the old leg before replacing it.
To detach the antenna, remove the plastic sheet from the leg (1) and detach the antenna from the Velcro by carefully
pulling the cable (2). Follow the standard leg replacement procedure to detach the old leg (3).

Figure 9.4.2.1: Leg Types

Figure 9.4.1.1: Standard Leg Replacement Process

Antenna
Compass
Antenna
Standard
42