Cable Cam; Figure 5.1.2.1: App - Selfie Control; Figure 5.1.2.2: Controller - Selfie Control; Figure 5.1.3.1: App - Selfie Settings - 3DR Solo User Manual

To control Selfie using the controller, use the right stick to move Solo forward and back along the Selfie path. Press
Pause at any time to stop Solo; press Fly to exit to standard flight.
5.1.3 Settings
To access the settings from the in-flight Selfie interface, select the option icon with the three dots in the bottom-
right. Use the sliders to adjust distance out, altitude up, and cruise speed. Select Selfie How-To for instructions and
tips.
5.2

Cable Cam

Cable Cam creates a smooth shot by flying Solo along an invisible cable between any two preset points.
5.2.1 Starting Cable Cam
Press A on the controller, or select Cable Cam from the Shot List on the app. Both devices will prompt you to fly
Solo to your first point and press A to save it as the first Cable Cam point. Then fly to your second point and press B
to save the second point. Try adding a difference in altitude or orientation between the two points for an impressive
cinematic effect.

Figure 5.1.2.1: App - Selfie Control

Figure 5.1.2.2: Controller - Selfie Control

Figure 5.1.3.1: App - Selfie Settings

Move along
flight path
27