Download Print this page
Black & Decker VEC156BD Manual

Black & Decker VEC156BD Manual

1,000,000 power series
Hide thumbs Also See for VEC156BD:

Advertisement

VEC156BD
53SB
E231887
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-877-571-2391
BEFORE YOU CALL, HAVE THE CATALOG No
,
AVAILABLE
.
IN MOST CASES
,
A REPRESENTATIVE
CAN RESOLVE THE PROBLEM OVER THE PHONE.
SAVE THIS MANUAL FOR FUTURE REFERENCE.

Advertisement

loading

Summary of Contents for Black & Decker VEC156BD

  • Page 1 VEC156BD 53SB E231887 BEFORE RETURNING THIS PRODUCT FOR ANY REASON PLEASE CALL 1-877-571-2391 BEFORE YOU CALL, HAVE THE CATALOG No AVAILABLE IN MOST CASES A REPRESENTATIVE CAN RESOLVE THE PROBLEM OVER THE PHONE. SAVE THIS MANUAL FOR FUTURE REFERENCE.
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS WARNINGS 1. All halogen lights give off heat. Never place the light face-down on any surface when lit. 2. Never look directly into the light or shine the light into another person’s eyes. 3. Replace bulb with type indicated in specifications or a 6 volt H3 quartz halogen bulb. 4.
  • Page 3 TABLE OF CONTENTS Introduction ........... 1 Features .
  • Page 4: Periodic Maintenance

    OPERATING INSTRUCTIONS To turn the cordless spotlight on depress the Trigger Switch. Depressing the Trigger DC RECHARGING RUBBER BEZEL Switch at one-second intervals advances the brightness level from dim to brightest. PORT TRIGGER SWITCH TRIGGER SWITCH LOCK QUARTZ HALOGEN TRIGGER SWITCH BULB PISTOL GRIP HANDLE LOCK...
  • Page 5: Parts Replacement

    Insert the power plug into the accessory outlet of your vehicle or other 12 volt DC 8. Using the screwdriver, loosen the retaining screw to remove the bulb from the power source. reflector (no need to completely remove this screw). Make sure the spotlight is OFF and the Trigger Switch is in the OFF position 9.
  • Page 6: Specifications

    SPECIFICATIONS WARNINGS Spotlight Bulb: 6 volt, H3 series, 55 watt Do not dispose of the battery in fire, as this may result in an explosion. Battery: Maintenance-free, sealed lead acid, Before disposing of the battery, protect exposed terminals with 6 volt, 3 amp hour heavy-duty electrical tape to prevent shorting (shorting can result in injury or fire).