Locating Wireless Microphones; Using The Conference Phone As A Pc Speakerphone - VTech ErisStation VCS754 User Manual

Conference phone operation

Locating wireless microphones

This feature helps you find any misplaced wireless mics within the range of the
base unit.
To locate wireless microphones:
1. Press MENU, and then highlight and select STATUS.
2. On the Status menu, highlight and select Wireless microphone.
3. On the Wireless microphone menu, press .
The base unit screen displays Wireless microphones will ring. Press CANCEL/
Back to stop. All wireless mics that are not on the charging cradles play the location
tone for 30 seconds.
To mute the mic-location tone:
• Press MUTE ALL on a wireless mic, or put it back onto the charging cradle.

Using the conference phone as a PC speakerphone

To use the conference phone as a speakerphone for your PC-based voice calls,
connect the VCS754 to your PC with the supplied USB cable. The cable connects to
the VCS754 USB port shown on page 7.
After connecting the devices, the VCS754 should appear as "USB Audio Device" in
your application's audio settings (when using the Windows® operating system).
Ensure that you have selected the VCS754 as the default audio device on your PC.
When you press the soft key, the audio from your soft phone or messaging
PC SPK
application will be directed to the VCS754, and you can continue your call using the
conference phone.
The screen shown below appears, and the VCS754 status indicators turn green.
21