Inserting Or Removing The Battery; Inserting A Battery (With Lock Latch); Removing A Battery (With Lock Latch) - HP J8K44PA User Manual

AC adapter
●
Optional USB docking or expansion device
●
Optional power adapter purchased as an accessory from HP
●
Resolving a low battery level when no power source is available
To resolve a low battery level when no power source is available, save your work and shut down the
computer.

Inserting or removing the battery

NOTE: Refer to the illustration that most closely matches your computer.

Inserting a battery (with lock latch)

To insert the battery:
1. Turn the computer upside down on a flat surface, with the battery bay toward you.
2. Insert the battery into the battery bay, aligning the tabs on the battery (1) with the notches on the
computer.
3. Tilt the battery (2) down until it is seated, and then slide the battery lock latch (3) to lock the
battery into place.

Removing a battery (with lock latch)

To remove the battery:
CAUTION:
information. To prevent loss of information, save your work and shut down the computer through
Windows before removing the battery.
1. Turn the computer upside down on a flat surface, with the battery bay toward you.
2. Slide the battery lock latch (1), and then slide the battery release latch (2) to release the battery.
48 Chapter 6 Power management
Removing a battery that is the sole power source for the computer can cause loss of