Replacing Or Upgrading The Hard Drive; Removing The Hard Drive - HP J8K44PA User Manual

4. Tighten the service door screw (4) to secure both service doors.
NOTE:
5. Insert the battery (see

Replacing or upgrading the hard drive

CAUTION:
Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the
hard drive while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off, turn the computer on by pressing the power button.
Then shut down the computer through the operating system.

Removing the hard drive

NOTE: Your computer may look slightly different from the illustration in this section.
To remove a hard drive:
1. Save your work and shut down the computer.
2. Disconnect AC power and external devices connected to the computer.
3. Turn the computer upside down on a flat surface.
4. Remove the battery (see
Your computer may look slightly different from the illustration in this section.
Inserting or removing the battery on page
To prevent information loss or an unresponsive system:
Inserting or removing the battery on page
48).
48).
Using hard drives 59