HP OmniBook 4150 Reference Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Laptop
  5. OMNIBOOK 4150
  6. Reference manual
HP OmniBook 4150 Reference Manual

HP OmniBook 4150 Reference Manual

Hewlett-packard laptop user manual
Hide thumbs Also See for OmniBook 4150:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , User Manual
HP OmniBook 4150
Reference Guide
For other Service and User Manuals, go to www.ManualDepot.com

Advertisement

Table of Contents
loading

Related Manuals for HP OmniBook 4150

Summary of Contents for HP OmniBook 4150

  • Page 1 HP OmniBook 4150 Reference Guide For other Service and User Manuals, go to www.ManualDepot.com...
  • Page 2 Notice This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
  • Page 3 CD-ROM: (i) The product Recovery CD-ROM and/or support utility software may only be used for restoring the hard disk of the HP computer with which the product Recovery CD-ROM was originally provided. (ii) The use of any operating system software by Microsoft contained in any such product Recovery CD-ROM shall be governed by the Microsoft End User License Agreement (EULA).
  • Page 4 Transfer of Rights in Software. Customer may transfer rights in the software to a third party only as part of the transfer of all rights and only if Customer obtains the prior agreement of the third party to be bound by the terms of this License Agreement. Upon such a transfer, Customer agrees that his/her rights in the software are terminated and that he/she will either destroy his/her copies and adaptations or deliver them to the third party.

  • Page 5: Table Of Contents

    Working in Comfort ... 35 About Repetitive Strain Injury ... 35 Preparing Your Work Environment ... 37 Setting Up Your HP Computing Equipment... 39 Comfort and Safety Checklist ... 44 Your HP OmniBook Computer ... 46 Taking Care of Your OmniBook... 48...
  • Page 6 Managing Battery Power... 49 How Power is Managed ... 50 Monitoring Battery Power... 51 To install APM for Windows NT 4.0... 51 To check the battery status ... 52 To respond to a low-battery warning ... 52 To recharge a battery ... 53 To replace the battery ...
  • Page 7 To recover the factory installation of Windows... 116 To update the OmniBook BIOS ... 117 To replace a damaged Recovery CD ... 117 Support and Service... 119 Getting HP OmniBook Assistance... 120 Support Assistance ... 120 Electronic Support Services ... 120 Reference Guide...
  • Page 8 Repair Assistance ... 121 Customer Support Centers... 121 Hewlett-Packard Limited Warranty Statement ... 123 Specifications and Regulatory Information... 125 Hardware Specifications... 126 Software System Resources ... 129 Safety Information... 132 Power Cords... 132 Ergonomics ... 133 Battery Safety ... 133 Laser Safety ...

  • Page 9: Introducing The Omnibook

    Introducing the OmniBook Reference Guide...

  • Page 10: Getting More Information

    This is shipped with your OmniBook and contains information about using the manual standard features of the version of Microsoft Windows shipped with your computer. OmniBook website http://www.hp.com/omnibook. http://www.europe.hp.com/omnibook (European mirror). HP Customer Care http://www.hp.com/cposupport/eschome.html. website Corporate This provides information about installing alternate operating systems, as well as Evaluator’s Guide...

  • Page 11: Taking Inventory

    Taking Inventory The HP OmniBook 4150 represents a category of HP notebook computers featuring the latest mobile technologies available. It uses high-speed Intel processors, large TFT displays, and high-capacity hard drives. Included in the OmniBook box HP OmniBook 4150. Floppy disk drive.

  • Page 12: To Buy Omnibook Accessories

    Buy OmniBook accessories online! For the latest accessories and options, visit us at http://www.hp.com/omnibook As new accessories become available, you’ll find them listed here. At the time of this printing, HP offers a variety of docking solutions, plug-in modules, and other accessories, including the following: Docking system and monitor stand.

  • Page 13: Omnibook Features

    OmniBook Features OmniBook—Front View 1. Keyboard status lights (left to right: caps lock, keypad lock, num lock). 2. Built-in microphone. 3. Blue power button. Turns the OmniBook on and off. 4. Pointing stick (pointing device). 5. Touch pad (pointing device). 6.

  • Page 14: Omnibook-Side View

    Introducing the OmniBook OmniBook Features OmniBook—Side View 16. PS/2 keyboard or PS/2 mouse port (supports Y adapter). 17. Universal serial bus port (USB). Windows NT 4.0 does not support USB. 18. System-off button (to shut down the OmniBook). 19. Built-in speakers. Reference Guide 20.

  • Page 15: Omnibook-Back View

    OmniBook—Back View 23. Infrared port. Windows NT 4.0 does not support infrared communication. 24. Kensington lock slot (security connector) 25. Parallel port (LPT1). Use this port for a parallel printer, other parallel device, or to connect the floppy disk drive externally. Introducing the OmniBook OmniBook Features 26.

  • Page 16: Setting Up For The First Time

    To set up the OmniBook and Windows CAUTION Use only the HP adapter model F1454A (or other approved adapter) with this product. Using any other ac adapter could damage the OmniBook and may void your warranty. Refer to the warranty statement for your product.
  • Page 17 Year 2000 Hewlett-Packard makes no representation or warranty about the Year 2000 readiness of non-HP products including pre-installed operating systems or application software. Customer should contact the software manufacturer directly to determine if any additional actions by Customer are necessary to ensure compliance.

  • Page 19: Operating The Omnibook

    Operating the OmniBook Reference Guide...

  • Page 20: Starting And Stopping The Omnibook

    Operating the OmniBook Starting and Stopping the OmniBook Starting and Stopping the OmniBook You can easily start and stop your OmniBook using the blue power button. However, at certain times, you may want to use other methods for starting and stopping your OmniBook—depending on power considerations, types of active connections, and start- up time.

  • Page 21: To Reset The Omnibook

    3. After the computer shuts down, press the blue power button to turn it on. Hint To boot from a CD-ROM or DVD drive in the module bay, press ESC two times during reboot when you see the HP logo. Then select the CD-ROM/DVD drive as the temporary boot device. Operating the OmniBook...

  • Page 22: Checking The Status Of The Omnibook

    Operating the OmniBook Checking the Status of the OmniBook Checking the Status of the OmniBook To check power status and drive activity The OmniBook has status lights that report power status and drive activity. When the floppy disk drive is installed in the module bay, the following lights are present on the front of the OmniBook and the module bay.

  • Page 23: To Check The Keyboard Status

    To check the keyboard status The keyboard status lights, located above the keyboard, indicate the states of the keyboard locks. 1. Caps Lock. Caps Lock is active. 2. Keypad Lock. The embedded keypad is active (Fn+F8). Num Lock must also be on for the numeric keys—otherwise, cursor control is active.

  • Page 24: Using The Omnibook Pointing Devices

    Operating the OmniBook Using the OmniBook Pointing Devices Using the OmniBook Pointing Devices Two pointing devices (pointing stick and touch pad) are built into your OmniBook. 1. Pointing stick (pressure-sensitive pointing device). 2. Touch pad (touch-sensitive pointing device). 3. Click buttons (two above and two below the touch pad). Both pointing devices use these click buttons, which work like the left and right buttons on a standard mouse.

  • Page 25: To Use The Built-In Pointing Devices

    Under Windows 2000, enhanced features for the pointing stick and touch pad are not available at this time. Check the Customer Care website (http://www.hp.com/cposupport/eschome.html) for PS/2 TrackPoint and touch pad device drivers for Windows 2000. The default pointing device driver is the standard PS/2 Compatible Mouse driver.

  • Page 26: To Activate Full Touch Pad Capabilities

    Disable the pointing stick 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. Select the System Devices menu. 4. Highlight Internal Pointing Devices and select Touch Pad.

  • Page 27: To Activate Full Pointing Stick Capabilities

    Enable the pointing stick 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. Select the System Devices menu. 4. Highlight Internal Pointing Devices and select Pointing Stick. (Choose Both if you want basic touch pad features available.)

  • Page 28: To Configure Pointing Devices

    Operating the OmniBook Using the OmniBook Pointing Devices To configure pointing devices To customize the operation of all pointing devices (pointing stick, touch pad, and external PS/2 or serial mouse), in Control Panel open Mouse. You can change left and right button actions, double-click speed, pointer speed and tail, and more.

  • Page 29: Using The Omnibook Display

    Using the OmniBook Display To adjust the display brightness The OmniBook uses special key combinations, called hot keys, to control brightness. Press Fn+F1 to decrease the brightness. Press Fn+F2 to increase the brightness. Hint To maximize your battery operating time, set the brightness to the lowest comfortable setting, so that the internal light uses less power.

  • Page 30: To Suspend The Omnibook When Closing The Display

    1. Close all applications, then shut down Windows and restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the Power menu, choose Lid Switch Mode.

  • Page 31: Adjusting The Audio System

    Adjusting the Audio System The OmniBook supports Sound Blaster Pro-compatible sound and the Microsoft Windows Sound System. To adjust the volume On the Keyboard To increase the volume, press Fn+UP-ARROW. To decrease the volume, press Fn+DOWN-ARROW. To temporarily silence the speaker without changing the volume setting, press the mute button on the right side of the OmniBook.

  • Page 32: Using The Omnibook Keyboard

    For information about reducing your risk, see Working in Comfort in the online OmniBook Library, or visit our ergonomics website, http://www.hp.com/ergo. If you are using your portable computer as your primary computer, or using it for extended periods, you should use it with a full-size keyboard, monitor, and mouse.

  • Page 33: To Use The Windows Keys

    To use the Windows keys There are two Windows keys on the keyboard. The one next to the Fn key brings up the Windows Start menu. The one at the top center of the keyboard brings up the shortcut menu for the current application.

  • Page 34: To Use The Alt Gr Key

    Operating the OmniBook Using the OmniBook Keyboard To use the ALT GR key Non-U.S. keyboards have an ALT GR key to the right of the spacebar. This is a shift key providing access to certain keyboard characters. For a character in the lower-right corner of a key, press and hold ALT GR to type the character.

  • Page 35: Working In Comfort

    Thank you for selecting HP computing equipment. To optimize your comfort and productivity, it is important that you set up your work area correctly and use your HP equipment properly. With that in mind, we have developed some set-up and use recommendations for you to follow based on established ergonomic principles.
  • Page 36 Operating the OmniBook Working in Comfort RSI has been a reported problem for those who perform repetitive tasks such as assembly line work, meatpacking, sewing, playing musical instruments, and computer work. RSI also has been observed in those who frequently engage in activities such as carpentry, knitting, housework, gardening, tennis, windsurfing and lifting children.

  • Page 37: Preparing Your Work Environment

    Preparing Your Work Environment When using HP computing equipment, it is important that your work environment contribute to your comfort and productivity. Your Chair It’s very important that your chair provides a comfortable sitting position and offers the following features: A stable base, such as five legs with casters.
  • Page 38 Operating the OmniBook Working in Comfort A curved seat edge. The front of the seat should be curved and finished in a “waterfall” edge. An adjustable back support in both height and forward and backward tilt. It is important that the backrest correctly supports the lower part, or lumbar curve, of the back.

  • Page 39: Setting Up Your Hp Computing Equipment

    Overall: Change your position frequently and take regular breaks to avoid fatigue. Setting Up Your HP Computing Equipment Make sure that all the elements of your HP computer system—monitor, document holder, keyboard, mice and other input devices, and headphones and speakers—are optimally arranged and adjusted to meet your personal requirements.
  • Page 40 Operating the OmniBook Working in Comfort The top of your monitor screen should be at or slightly below eye level. Most HP monitors come with a tilt-and-swivel feature that makes it easy to adjust the screen position. To avoid obscuring your view, the screen should be positioned perpendicular to your line of sight;...
  • Page 41 Your HP Keyboard The proper positioning and use of your HP keyboard is important when using HP computing equipment. Be sure to observe the following recommendations to optimize your comfort and safety:...
  • Page 42 We recommend you place your keyboard in front of the screen or document holder, whichever is viewed the most. Your HP keyboard has long cables so you can place it in the position that is most comfortable for you while you are using your system.
  • Page 43 Operating the OmniBook Working in Comfort As with the keyboard, try to keep your hand, wrist, and forearm in a neutral position while using your mouse or other input device. When using a stylus or light pen with a graphics tablet, don’t grip the stylus tightly. Keep your hand and fingers relaxed and try to maintain a neutral posture in your hand, wrist and forearm.

  • Page 44: Comfort And Safety Checklist

    Listening to loud sounds for prolonged periods may permanently damage your hearing. To avoid discomfort from unexpected noise, always turn down the volume before connecting headphones or speakers to your HP equipment. When you put on the headphones, slowly increase the volume until you find a comfortable listening level, then leave the volume control in that position.
  • Page 45 Working in Comfort, which is preloaded on the hard disk of your HP computing equipment.

  • Page 46: Your Hp Omnibook Computer

    HP port replicators offer quick, easy connections to these devices. More information on how to prepare your workspace environment and set up your HP equipment is available in other sections of Working in Comfort, which is preloaded on the hard disk of your HP computing equipment.
  • Page 47 Operating the OmniBook Working in Comfort Take frequent, short rest breaks. This is especially important in a mobile computing environment. Portable computers weigh between approximately 1.4 and 3.7 kilos (3 and 8 pounds). When traveling, be sure to carry your computer properly to minimize strain on your body.

  • Page 48: Taking Care Of Your Omnibook

    Operating the OmniBook Taking Care of Your OmniBook Taking Care of Your OmniBook Protect your OmniBook from damage Observe the temperature limits and other specifications listed in “Hardware Specifications” on page 126. Do not use the OmniBook outside in the rain or snow (inclement weather).

  • Page 49: Managing Battery Power

    Managing Battery Power Reference Guide...

  • Page 50: How Power Is Managed

    Managing Battery Power How Power is Managed How Power is Managed The OmniBook conserves power by using software that controls battery charging and power drain. If you’re using Windows 95 or Windows 98, Advanced Power Management (APM) is preinstalled on the OmniBook. If you’re using Windows NT 4.0, look for a Power icon in the taskbar.

  • Page 51: Monitoring Battery Power

    Monitoring Battery Power The primary source of power for the OmniBook is its rechargeable battery pack. You can use the ac adapter to recharge the battery—or to run on ac power to preserve the battery. Important Running external connections is a power-intensive operation that significantly shortens the length of a battery session.

  • Page 52: To Check The Battery Status

    Managing Battery Power Monitoring Battery Power To check the battery status From the Windows Taskbar Move the pointer onto the power icon at the right end of the taskbar. If you are using Windows NT 4.0, you’ll need to install Advanced Power Management to display the power icon (see “To install APM for Windows NT 4.0”...

  • Page 53: To Recharge A Battery

    To recharge a battery CAUTION The ac adapter is normally warm to the touch whenever it’s plugged into an ac outlet. The OmniBook is normally warm while it’s charging. Don’t charge it in a briefcase or other confined space as this may cause the battery to overheat. 1.

  • Page 54: To Replace The Battery

    Managing Battery Power Monitoring Battery Power To replace the battery CAUTION If you have any unsaved data, it (and your current work session) will be lost when you remove the battery unless the computer is connected to ac power. Also, you should wait at least 3 seconds after inserting the battery before you unplug the ac adapter.

  • Page 55: To Install A Second Battery

    6. With the latch in the open position, slide the charged battery into the OmniBook until it is flush with the unit. 7. Close the battery bay release latch. WARNING Do not mutilate, puncture, or dispose of batteries in fire. A battery can burst or explode, releasing hazardous chemicals.

  • Page 56: Conserving Battery Power

    Managing Battery Power Conserving Battery Power Conserving Battery Power The OmniBook uses to conserve battery power. You can manage this software to optimize your battery operating time. If you’re using Windows 95 or Windows 98, Advanced Power Management (APM) is preinstalled on the OmniBook. If you’re using Windows NT 4.0, make sure APM is installed (see “To install APM for Windows NT 4.0”...

  • Page 57: To Set Power Time-Outs

    1. From the Start menu, shut down then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. Active keys are described along the bottom of the screen. (The pointing devices are not active in the BIOS Setup utility.) Help information for the highlighted item appears in the right-...

  • Page 58: To Control The Processor Speed

    Managing Battery Power Conserving Battery Power To control the processor speed If your OmniBook contains a high-speed Pentium III processor with Intel SpeedStep Technology, you can change settings that control the processor speed. If the taskbar contains an Intel SpeedStep Technology icon, your computer has this feature. With the default settings, the processor speed changes automatically according to the power source (ac adapter or battery).

  • Page 59: To Get The Most From Your Battery

    To get the most from your battery The following are some further suggestions for the best management of your OmniBook batteries. Do not leave batteries unused for long periods of time. If you have more than one, rotate them. If you normally use ac power, make a practice of at least once a week using the battery as your power source.

  • Page 61: Expanding The Omnibook

    Expanding the OmniBook Reference Guide...

  • Page 62: Using Plug-In Modules

    The Agaté Tioman hot-swap software lets you disconnect most modules in the plug-in bay without shutting down the computer and rebooting. (This software does not support Windows NT.) Click Start, Programs, Agaté Tioman for HP, Setup, then follow the onscreen instructions. Reference Guide...

  • Page 63: To Replace A Plug-In Module

    To replace a plug-in module For Windows 95 or Windows 98, if Agaté Tioman hot-swap software is installed, a plug- in module icon appears at the right end of the taskbar. This software lets you disconnect most plug-in modules without shutting down the computer. For a hard drive module, you must shut down the computer.
  • Page 64 Expanding the OmniBook Using Plug-In Modules 3. Slide the module release latch forward as far as it will go. 4. Gently move the release latch back until the module pops out. 5. Grasp the underside of the module firmly, and pull out. 6.

  • Page 65: To Connect The Floppy Disk Drive To The Parallel Port

    If you have a CD-ROM drive or other module in the module bay, you can connect the floppy disk drive to the parallel port. 1. Buy a floppy drive cable, HP accessory F1473A. 2. Connect the cable directly to the floppy drive and to the OmniBook parallel port.

  • Page 66: To Play Dvd Movies

    Expanding the OmniBook Using Plug-In Modules 3. Slide the CD-ROM tray back into the module to close it. If you lose power to the OmniBook, or if you have removed the CD-ROM or DVD module from the OmniBook, you can manually open the drive to remove a CD. Insert a straightened paper clip into the recessed hole on the front of the drive, as shown above.

  • Page 67: Connecting External Devices

    Connecting External Devices You can expand the OmniBook’s capabilities by connecting other devices. Note Before you connect any device, check the documentation that came with the equipment to see if you need to make any settings or adjustments to the equipment before using it. This might include setting switches to configure the equipment so that it will operate properly with the OmniBook and the software you plan to use.

  • Page 68: To Connect An External Monitor

    To connect an external monitor You can connect a VGA, SVGA, XGA, or SXGA monitor to your OmniBook—or UXGA for a computer with “4150 B” after the serial number. The OmniBook’s internal display supports standard XGA mode (1024 by 768 pixels).

  • Page 69: To Use An External Monitor

    5. Select Auto (to automatically detect and select the external display) or Both (to select both displays). 6. Similarly, highlight Primary Video Adapter. Select Auto (to automatically switch to an external video adapter in a docking system) or Internal (to reserve the external display for special use, such as multiple displays in Windows 98).

  • Page 70: To Connect An External Keyboard Or Ps/2 Mouse

    Plug the mouse or keyboard PS/2 cable into the PS/2 port on the OmniBook. To connect both a mouse and keyboard, use the HP F1469A Y adapter. To connect a device that has a PC-type jack, first connect its cable to an adapter cable with a PS/2 jack.

  • Page 71: To Connect A Serial Mouse

    To connect a serial mouse For Windows 95, 98, and NT 1. Connect the serial cable to the serial port. 2. From the Start menu, click Settings, Control Panel. 3. Double-click Mouse, then click General. 4. Click Change and then select Show All Devices. 5.

  • Page 72: To Connect Audio Devices

    Expanding the OmniBook Connecting External Devices To connect audio devices There is a built-in microphone located at the bottom of the OmniBook display. You can use it to record voice, sound, and music. You can also plug in a stereo input source, (such as a CD player), an external microphone, and external speakers or headphones.
  • Page 73 automatically on Windows 98 and 2000 during reboot. For more information, refer to the Readme file located in \OmniBook\Drivers. The OmniBook has an infrared port—located on the back of the OmniBook—which provides wireless, serial communication between the OmniBook and other infrared devices such as printers or other OmniBooks.

  • Page 74: Using Pc Cards

    Expanding the OmniBook Using PC Cards Using PC Cards To insert and remove a PC Card Note Windows NT 4.0 does not support zoomed video. If you are using Windows NT 4.0, make sure Card Executive is installed (see “To install Card Executive for Windows NT”...

  • Page 75: To Find Tested Pc Cards

    To find tested PC Cards For the latest information about compatible cards, visit our website at http://www.hp.com/omnibook and check the Accessories section. Or contact Hewlett- Packard as described in “Support Assistance” on page 120. To install Card Executive for Windows NT 4.0 If a PC Card icon is present in the taskbar, Card Executive is installed.

  • Page 76: Using Docking Products

    Expanding the OmniBook Using Docking Products Using Docking Products A docking product provides external connections for the OmniBook that you can leave in place whenever you remove the OmniBook from your desk. Instead of disconnecting and reconnecting peripheral devices, simply undock and dock the OmniBook. For more information about using docking products, see the User’s Guide that shipped with your dock.

  • Page 77: To Dock The Omnibook

    To dock the OmniBook 1. From the Start menu, shut down the OmniBook. If you have a plug-and-play operating system, such as Windows 95, Windows 98, or Windows 2000, you do not need to turn off the OmniBook before inserting into the dock.

  • Page 78: To Undock The Omnibook

    Expanding the OmniBook Using Docking Products To undock the OmniBook 1. If you’re using Windows NT, click Start, Shut Down. 2. Press the undock button on the front of the dock and wait for the undock light to blink. Then position your thumb as shown and pull the release lever forward. 3.

  • Page 79: Installing A Hard Disk Drive

    Installing a Hard Disk Drive To replace the hard disk drive You’ll need a small Phillips screwdriver for this procedure. 1. Unplug the ac adapter, if present, and remove the battery. 2. Turn the unit bottom side up and remove the hard drive screw. 3.

  • Page 80: To Replace The Hard Disk Drive Holder

    Expanding the OmniBook Installing a Hard Disk Drive To replace the hard disk drive holder If you are installing a new hard drive that does not have a cover, you can remove the cover parts from the old hard drive. You’ll need a small Phillips screwdriver for this procedure.
  • Page 81 Expanding the OmniBook Installing a Hard Disk Drive 4. Carefully pry the connector off the end of the hard disk drive. Work alternately at each end so that the connector slides off evenly. CAUTION If a rubber spacer is present inside the case, be sure to install it if the new hard disk drive is the same thickness as the old one.

  • Page 82: Installing A Ram Expansion Module

    OmniBook. For a model with “4150 B” after the serial number, you must use only PC-100 type RAM modules—other RAM modules will not function. 1. From the Start menu, shut down the OmniBook.

  • Page 83: To Remove A Ram Expansion Module

    4. Insert the RAM board into the connector at about a 30° angle until it is fully inserted. Then press down at both sides until both latches snap closed. 5. Replace the door. 6. Insert the battery. To remove a RAM expansion module You may want to remove a RAM module so you can install a larger one.
  • Page 84 Expanding the OmniBook Installing a RAM Expansion Module 4. Release the two latches at the sides of the RAM board, so the free edge of the board pops up. 5. Pull the board out of the connector. 6. Replace the door. 7.

  • Page 85: Configuring The Omnibook

    Configuring the OmniBook Reference Guide...

  • Page 86: Using Bios Setup

    1. Close all applications, then shut down Windows and restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. The pointing devices are not active in the BIOS Setup utility. Press the RIGHT and LEFT arrow keys to move among menus.
  • Page 87 Main Menu Setting Description Language Sets the language for this utility and for BIOS messages. BIOS Revision Shows the current BIOS version. System Time Sets the time using 24-hour format. Values set take effect immediately. System Date Sets the date using dd/mm/yy format (except English, which is mm/dd/yy format).
  • Page 88 Configuring the OmniBook Using BIOS Setup System Devices Menu Setting Description PS/2 Pointing Devices Disables the internal pointing devices when an external PS/2 mouse is connected. This is required for the scroll wheel on a PS/2 mouse to function. Enables one or both built-in PS/2 devices. Internal Pointing Devices External Fn Key...
  • Page 89 Security Menu Setting Description User Password Is Shows if a user password is set. Administrator Password Shows if an administrator password is set. Set User Password Press ENTER to set, change, or clear user password. Password length can be no longer than 8 characters, 0-9, A- Z, and cannot include special or accented characters.
  • Page 90 Absence of keyboard, mouse, and hard disk activity could cause slower CPU response. For a model without “4150 B” after the serial number, this should normally be Off to avoid interfering with time sensitive operations—and this setting applies to both battery and ac power.
  • Page 91 Resume on Time of Day Sets whether the system resumes from Suspend at a defined time of day. Resume Time Sets the 24-hour time when the system resumes from Suspend if enabled. Auto Suspend on Sets whether the OmniBook suspends after undocking. Undock* Auto Turn-on on Dock* Sets whether the OmniBook turns on after docking.

  • Page 92: Using Toptools

    To run TopTools locally, click Start, Programs, HP TopTools for Notebooks (or HP DMI), HP TopTools. To get more information about TopTools For information on manageable HP PCs, HP TopTools, and how they lower PC operating costs, see the HP website at http://www.hp.com/toptools. Reference Guide...

  • Page 93: Configuring Security Options

    1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. Select the Security menu. 4. Select Set Administrator Password, then press ENTER.

  • Page 94: To Delete An Omnibook Password

    1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. Select the Security menu. 4. Select Set Administrator Password, then press ENTER.

  • Page 95: To Attach A Security Cable

    You must have administrator password authority to set a PC identification number. 1. If you have not already installed HP TopTools, do so now (see “To install TopTools” on page 92). 2. Click Start, Programs, HP TopTools for Notebooks (or HP DMI), HP TopTools.

  • Page 96: To Enable Hard Disk Drive Lock

    If you forget the password, you cannot recover your data. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the Security menu, enable Password Required To Boot.

  • Page 97: Troubleshooting

    Troubleshooting Reference Guide...

  • Page 98: Solving Problems

    For information about system addresses, interrupts, or memory, see “Software System Resources” on page 129. Find technical tips and software updates for the OmniBook at the HP Customer Care website (http://www.hp.com/cposupport/eschome.html). Test your OmniBook by running the DiagTools test program. See “To run the diagnostic test”...

  • Page 99: Audio Problems

    If you always want to boot from a CD, check the boot order in BIOS Setup. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. Open the Boot menu. The default boot order is...

  • Page 100: Display Problems

    Troubleshooting Solving Problems For a model without “4150” after the serial number, check settings in BIOS Setup. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
  • Page 101 If the OmniBook is cold, allow it to warm up. If the screen is difficult to read Check whether the display resolution is set to its default setting, 1024 × 768 (XGA). Check this in Start, Settings, Control Panel, Display, Settings. Check brightness (press Fn+F2 to increase brightness).

  • Page 102: Hard Disk Drive Problems

    Troubleshooting Solving Problems See Windows 98 Help for information about setting up and using multiple displays. Hard Disk Drive Problems If the OmniBook’s hard drive doesn’t spin Check the power source. Remove and reinsert the hard drive. See “To replace the hard disk drive” on page 79. If the hard disk makes buzzing or whining noise Back up the drive immediately.
  • Page 103 Make sure the touch pad or pointing stick is enabled in the BIOS Setup utility. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the System Devices menu, check Internal Pointing Devices.

  • Page 104: Infrared Problems

    1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the System Devices menu, check that Infrared Port is enabled and the desired mode is selected.

  • Page 105: Memory Problems

    If memory doesn’t increase after adding RAM Use the correct type of memory (RAM) modules for your computer. For a model with “4150 B” after the serial number, use only PC-100 modules. PC Card (PCMCIA) Problems If the OmniBook doesn’t recognize a PC Card For Windows NT, make sure Card Executive is installed.

  • Page 106: Performance Problems

    Try the card in another computer. Not all 3rd party PC cards have been tested with the OmniBook. Please check the OmniBook website (http://www.hp.com/omnibook) for a list of approved and tested PC Cards. For a Xircom CE2 (IIps) LAN card, certain of these cards conflict with the game port device in Windows 2000.

  • Page 107: Power And Battery Problems

    Check the BIOS Setup settings. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the Power menu, set the Power Management Mode to Max. Performance.
  • Page 108 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the Power menu, make sure the Power Management Mode is set to Maximum Power Savings.
  • Page 109 Press the blue power button to suspend the OmniBook. Then press the blue button again to turn the OmniBook back on. If nothing happens, insert a straightened paper clip into the system-off button on the left side of the OmniBook. Then press the blue power button to turn on the OmniBook.

  • Page 110: Printing Problems

    Solving Problems If the battery doesn’t finish charging in an external charger If you charge the battery in an HP external battery charger, the battery is finished charging when the charger’s orange light turns off. It doesn’t matter whether the green light turns on or stays off—the battery will be at least 90% full.

  • Page 111: Serial, Parallel, And Usb Problems

    Check settings in BIOS Setup. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the System Devices menu, check that Parallel and Serial are enabled.

  • Page 112: Startup Problems

    After checking all connections, check the boot order and setup in BIOS Setup utility. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. Open the Boot menu. The default boot order is...

  • Page 113: Testing The Operation

    See “To create a diagnostic floppy disk” on page 114. 1. Reboot the OmniBook. When you see the HP logo and the F10 prompt, press F10 to start the diagnostic test. 2. Go through the first several screens.

  • Page 114: To Create A Diagnostic Floppy Disk

    Check the C:\Dmi\Hpdiags directory. If diaginst is in this directory, double-click it. –or– If HP TopTools is installed, check the DiagTools page to see if it can create the disk. On any computer with World Wide Web access, download the diagnostic software package from the HP Customer Care website (http://www.hp.com/cposupport/eschome.html), and follow the instructions.

  • Page 115: Recovering Software

    On the Recovery CD ROM, under \Omnibook\Drivers. On the OmniBook hard drive under C:\Omnibook\Drivers. On the HP Customer Care website at http://www.hp.com/cposupport/eschome.html. This website contains the latest updates of software drivers. Detailed instructions for installing the drivers are contained in the Drivers\Readme file.

  • Page 116: To Recover The Factory Installation Of Windows

    2. Plug in the ac adapter. 3. Insert the Recovery CD in the CD-ROM drive. 4. Shut down and restart the computer—when you see the HP logo, press ESC two times. 5. Select the CD-ROM drive as the boot device.

  • Page 117: To Update The Omnibook Bios

    If you lose or damage the Recovery CD, take your OmniBook and Certificate of Authenticity to an HP Service Center to be replaced. If you mail your OmniBook for this service, you must provide a photocopy of the Certificate of Authenticity along with payment.

  • Page 119: Support And Service

    Support and Service Reference Guide...

  • Page 120: Getting Hp Omnibook Assistance

    Support and Service Getting HP OmniBook Assistance Getting HP OmniBook Assistance Support Assistance If you need assistance with your HP OmniBook or accessory, use any of the following support services: Provider Type 1. Electronic Support Services (see below) 2. Customer Support Centers (see below) 3.

  • Page 121: Repair Assistance

    Out of Warranty. Contact one of the support providers listed in items 2 or 3 in “Support Assistance” above, or an HP Service Center. The support provider will provide you with repair charges and processes in your area.
  • Page 122 Support and Service Getting HP OmniBook Assistance To contact the Customer Support Center by email, visit the HP Customer Care website at http://www.hp.com/cposupport/eschome.html. For the latest list of phone numbers, see the OmniBook website under Support, http://www.hp.com/omnibook. North America United States: (970) 635-1000...

  • Page 123: Hewlett-Packard Limited Warranty Statement

    3. HP does not warrant that the operation of HP products will be uninterrupted or error free. If HP is unable, within a reasonable time, to repair or replace any product to a condition as warranted, you will be entitled to a refund of the purchase price upon prompt return of the product.
  • Page 124 Support and Service Hewlett-Packard Limited Warranty Statement EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

  • Page 125: Specifications And Regulatory Information

    Specifications and Regulatory Information Reference Guide...

  • Page 126: Hardware Specifications

    Models without “4150” after serial number 256-bit NeoMagic MagicGraph graphics accelerator with 2.5-MB video RAM, 1x AGP graphics capability. Models with “4150 B” after serial number ATI Mobility-M or -M1 graphics accelerator with 4- or 8-MB video RAM, 2x AGP graphics capability.
  • Page 127 9-pin, 115,200-bps serial (16550 UART). 25-pin bi-directional ECP/EPP parallel. Video-out. (Resolution up to 1280×1024×256 colors, or up to 1600×1200×64K or 16M colors for models with “4150 B” after serial number. Refresh rate 60 to 85 Hz.) Dual display. PS/2 keyboard/mouse.
  • Page 128 Audio: NeoMagic MagicGraph NM2200 (NMG5) and NeoMagic Audio NMA2. CardBus: TI PCI 1220A. Keyboard controller: National PC87570. Super I/O: SMC 769. Models with “4150 B” after serial number CPU: Intel Mobile Pentium II processor. South Bridge: PIIX4M. Video: ATI Mobility-M or -M1.

  • Page 129: Software System Resources

    Numeric data processor Internal hard disk (primary IDE controller) Internal CD-ROM drive (secondary IDE controller) Unmarked models have no “4150” after the serial number, “4150 B” models have “4150 B” after the serial number. Specifications and Regulatory Information Software System Resources...
  • Page 130 ** Valid uses for memory addresses CC000-DBFFF or D0000-DBFFF: Upper memory blocks (UMBs). PC card memory windows. *** Unmarked models have no “4150” after the serial number, “4150 B” models have “4150 B” after the serial number. System Input/Output Addresses (100-3FF) 120-127 Audio (only models without “4150”...
  • Page 131 Sound playback Floppy drive LPT1 (ECP parallel port) Cascade Free Free Free Unmarked models have no “4150” after the serial number, “4150 B” models have “4150 B” after the serial number. Specifications and Regulatory Information Software System Resources Reference Guide...

  • Page 132: Safety Information

    To purchase a power cord (including one for a country not listed below) or a replacement ac adapter (HP part number F1454A), contact your local Hewlett-Packard dealer or Sales and Service office.

  • Page 133: Ergonomics

    When discarding a battery pack, contact your local waste disposal provider regarding local restrictions on the disposal or recycling of batteries. To obtain a replacement battery, contact your local dealer or HP sales office. Do not charge the battery pack if the ambient temperature exceeds 45 °C (113 °F).

  • Page 134: Led Safety

    (EN60825 / EN60825-1). These devices are not considered harmful, but the following precautions are recommended: Ensure proper use by reading and following the instructions carefully. If the unit requires service, contact an authorized HP service center—see “Support Assistance” on page 120. Do not attempt to make any adjustment of the unit.

  • Page 135: Regulatory Information

    Regulatory Information This section presents information that shows how the OmniBook complies with regulations in certain regions. Any modifications to the OmniBook not expressly approved by Hewlett-Packard could void the authority to operate the OmniBook in these regions. U.S.A. The OmniBook generates and uses radio frequency energy and may interfere with radio and television reception.

  • Page 136: Canada

    Trade name: Hewlett-Packard Company Product name: HP OmniBook 4150 Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

  • Page 137: International

    (2) this device must accept any interference received, including interference that may cause undesired operation. The HP F1454A ac adapter used with this product is designed to operate on all power systems, other than IT power systems.

  • Page 139: Index

    Index ac (time-out), 57, 90 ac adapter charging battery, 53 connecting, 16, 53 jack, 13 part number, 16 accessories docking products, 76 plug-in modules, 63 troubleshooting, 98 adding RAM, 82 addresses (I/O), 130 adjusting brightness, 29 volume, 31 administrator password, 93 Advanced Power Management (APM) preinstalled for Windows 95/98,...
  • Page 140 (HDD), 80 hot computer, 106 hot keys, 32 hot swapping installing software, 62 swapping modules, 63 troubleshooting, 99 HP Customer Care website, 10 I/O addresses, 130 infrared port location, 15, 67 making connections, 73 mode, 88 printing, 73 safety, 134...
  • Page 141 lid switch, 30 lights (status), 13, 22, 23 locking (cable), 95 low battery charging, 53 warning, 52 LPT1 port, 15, 67 Main menu (BIOS), 87 memory adding, 82 extended, 87 PC-100, 82, 105 removing, 83 system, 130 troubleshooting, 105 microphone external, 72 location, 13 mini dock, 76, 98...
  • Page 142 hard drive holder, 80 PC Card, 74 RAM, 83 secondary battery, 55 repair service, 98 resetting, 21 safety battery use, 133 infrared port, 134 laser, 134 power cords, 132 saving battery power, 56 Scroll Lock, 23 security hard drive lock, 96 Kensington lock, 95 passwords, 93, 94 PC identification, 95...
  • Page 143 Service Pack, 98 USB not supported, 71 zoomed video not supported, 74 wireless communication, 73 working in comfort, 35 Y2K, 17 Y-adapter (PS/2), 70 zoomed video, 74 Reference Guide...

This manual is also suitable for:

Omnibook 4150b - notebook pc

Table of Contents