Feature User Guide
Infrastructure synchronizes the time and date. When not within the infrastructure signal range you can
set the values manually.
4.7.8.1 Setting Time and Date on the Display
Procedure Steps
From the home screen, press MENU key.
1
Select Setup → Time & Date → Display.
2
3
Select one of the following:
• Time & Date — Your radio displays time and date.
• Time Only — Your radio displays time only. Format Date sub-menu is disabled.
• Date Only — Your radio displays date only. Format Time sub-menu is disabled.
• Off — Your radio does not display time nor date. Format menu is disabled.
Display
Display
4.7.8.2 Setting Time Format
Prerequisites: If MENU → Setup → Time & Date → Display is set to Time & Date or Time Only.
Procedure Steps
1
From the home screen, press MENU key.
2
Select Setup → Time & Date → Format → Format Time.
3
Select one of the following:
• 12-Hour — Displays the time with am (before noon) or pm (after noon) indication.
• 24-Hour.
4.7.8.3 Setting Time Manually
When and where to use: If the time cannot update automatically through the infrastructure.
4-38
-