Setting Talkgroups In The Active Scan List; Setting Scan Lists - Motorola MTP3100 Feature User Manual

Procedure Steps
From the home screen, press MENU key.
1
2 Select Group Setup → Scan → Scanning.
Select Select List and then a list name.
3
Step result: Your radio displays list name Selected.
4 Select Scanning → On.
Result: Your radio is scanning on the predefined scan list.
Scan

4.8.1.2 Setting Talkgroups in the Active Scan List

When and where to use: If you want to edit talkgroups in the active scan list.
Procedure Steps
From the home screen, press MENU key.
1
2 Select Group Setup → Scan → Active List.
If Scanning is Off is displayed, go to Group Setup → Scan → Scanning → On to enable scanning.
Select View and highlight the required talkgroup.
3
Press MENU.
4
Select one of the following:
5
• Delete — Erases this group from the active scan list.
• Priority and select new priority to Low, Medium or High.

4.8.1.3 Setting Scan Lists

When and where to use: If you want to set up any scan list.
-
4.8.1.2 Setting Talkgroups in the Active Scan List
4-45