Selecting Network Operation Mode; Packet Data - Motorola MTP3100 Feature User Manual

Feature User Guide

4.11.3 Selecting Network Operation Mode

Procedure Steps
From the home screen, press MENU key.
1
2 Select Networks.
Select one of the following:
3
• Trunked Mode — Switches to the mode using infrastructure.
• Direct Mode — Switches to the mode without using infrastructure.
• TXI Mode — Select Activate to stop sending any radio transmission.
If the radio is in TXI Mode, it is not possible to switch from Direct Mode to Trunked Mode.
Networks
Entering TMO / DMO Mode

4.12 Packet Data

The Packet Data (PD) Service allows you to transfer data in a TETRA system using the Internet Protocol (IP).
To transfer data from a standard computer over the air, connect the computer via the PMKN4129 data
cable with your radio. Your service provider has to setup additional applications on your computer.
If set up by your service provider it is possible to accelerate the transmission by using the Multi-Slot Packet Data
(MSPD) Service.
4-52 -