Logging On; Logging Off; Networks; Selecting Network Operation Mode - Motorola MTP850 S Feature User Manual

98 | Main Menu

Logging On

Procedure:
1 From the home screen, press the
2 Select More . . . → RUI → Log on.
3 Highlight:
• User ID and press Select to enter User ID List. If you are a new user on this radio, select [New User ID] and
enter your user ID. Otherwise select your user ID from the list.
• Second line and press Edit, to enter user ID and press Ok.
4 Select User PIN, enter your credentials, and press Ok.
5 Logging screen is displayed.

Logging Off

Procedure:
1 From the home screen, press the
2 Select More . . . → RUI → Log off.
3 Press Accept.

Networks

This menu item allows you to switch between the radio operation modes.

Selecting Network Operation Mode

Procedure:
1 From the home screen, press the
2 Select More . . . → Networks.
3 Select one of the following:
• Networks Sel — Selects the network to which the radio is allowed to register.
• Trunked Mode — Switches to the mode using infrastructure.
• Direct Mode — Switches to the mode without using infrastructure.
• Repeater Mode — Switches to the Repeater Mode.
• TXI Mode — Select Activate to stop sending any radio transmission.
Note: If the radio is in TXI Mode, it is not possible to switch from Direct Mode to Trunked Mode
or Repeater Mode.

Selecting Your Network

Procedure:
1 From the home screen, press the
2 Select More . . . → Networks → Networks Sel → Home Only.
3 Your radio registers to the home network. If several home networks are defined, the radio registers to the first
available network on the list.
Send Feedback | |
key.
MENU
key.
MENU
key.
MENU
key.
MENU