Using The Speakerphone Feature; Playing Audio Via Aux In - iHome iBN6 Instruction Manual

Using the Speakerphone feature

NOTE: The unit must be powered on to receive a call. A Bluetooth phone must be linked.
1. When a call is received, playing music is muted to hear the ring tone. Press the
End Button to ignore it. For call waiting function, press the
or press the
call on hold and answer a new call; press the
2. When a call is completed, press the

Playing Audio via Aux In

1. Connect one end of the included 3.5mm stereo audio cable to the Aux in jack on the side of the unit under
the waterproof gasket and connect the other end to the headphone or line-out jack on your audio device.
Power Button on the unit to turn it on.
2. Press and hold the
3. Power on the audio device and use the controls on the device to play or pause audio, and navigate
tracks.
4. Adjust the volume on the unit as described previously.
5. When done listening, press the
device, too.
Note: Do not play an aux-in device while a Bluetooth device is playing or you will hear both.
PSP
mobile phone
PC
Talk Button to switch between the calls.
End Button to end the call and resume previous function.
Power Button to turn the unit OFF. Remember to turn off your audio
iPod MP3/MP4
Laptop
9
iBN6
Using the
Talk Button to answer the call,
Talk Button to place a currently active
P13