Download Print this page
Barco R9698236 Installation Manual
Barco R9698236 Installation Manual

Barco R9698236 Installation Manual

Osem/3-d kit slm series

Advertisement

Quick Links

BARCO PROJECTION SYSTEMS
OSEM/3-D Kit
SLM Series
R9698236
INSTALLATION MANUAL
3-D Polar/Optical Soft Edge Kit for Projector SLM Series
Date: 22.11..2001
Rev: 00
Art. No.: R5976401

Advertisement

loading

Summary of Contents for Barco R9698236

  • Page 1 BARCO PROJECTION SYSTEMS OSEM/3-D Kit SLM Series R9698236 INSTALLATION MANUAL 3-D Polar/Optical Soft Edge Kit for Projector SLM Series Date: 22.11..2001 Rev: 00 Art. No.: R5976401...
  • Page 2 Produced by BARCO NV, November 2001. All rights reserved. Trademarks are the rights of their respective owners. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.bps@barco.com Visite Barco at the web : http://www.barco.com Printed in Belgium...
  • Page 3 The name of the polar is located as shown on the illustration below (B): 3D FRONT R 3D FRONT RC 3D FRONT L 3D FRONT LC Illustration of the To be continued on next page BARCO ——————————————————— 3 ————————————— Projection Systems...
  • Page 4 Back view polar holder R366243 R312010 B361138 B361138 V3673796 R823626 RV3620756 Front view polar holder G115520 V3673796 R312010 R366242 B361138 R819615 R823625 Holder fixation bars: B358674 fixation screws: R3631649 R816851 To be continued on next page BARCO ——————————————————— 4 ————————————— Projection Systems...
  • Page 5 0: adjustment is not required Application Polarizer set up OSEM OSEM + Polarizer Page Adjustment ‡‚‚ Æ€ hyyÃÄ ‡‚‚ Ãi vt ÃÄ Holder dist adj Hor shift adj Vertical adj Hor fine adj Tilt BARCO ——————————————————— 5 ————————————— Projection Systems...
  • Page 6 Try to obtain an outcoming distance as shown on image 4 Follow the same procedure for the other bar Illustrations Image 1 Image 2 To be continued on next page BARCO ——————————————————— 6 ————————————— Projection Systems...
  • Page 7 Mounting the fixation bars Illustrations Image 3 Image 4 BARCO ——————————————————— 7 ————————————— Projection Systems...
  • Page 8 Step Action Image Place the holder on the fixation bars, the two holes must be in front of the remaining nuts in the bars. Tighten the bolts to secure the position. Illustrations Image 1 BARCO ——————————————————— 8 ————————————— Projection Systems...
  • Page 9 Slide the holder to the desired position. Secure the position by tightening the 4 bolts. Illustrations Image 1 Adjustm ent for m ax. spot size on the polarizer area ‡‚ ‚Æ€ hyyÃÄ ‡‚ ‚Ãivt ÃÄ Image 2 BARCO ——————————————————— 9 ————————————— Projection Systems...
  • Page 10 Secure the position by tightening the 3 bolts. Illustrations Image 1 6 q wÃC P S à ‚ †v‡v‚   sÇu r Ãyvt u ‡Ã†ƒ ‚ ‡Ã‚  Çu r à ‚ yh …v“r … Image 2 BARCO ——————————————————— 10 ————————————— Projection Systems...
  • Page 11 To perform a vertical shift, follow the next procedure: Step Action Image Loosen the 2 indicated bolts Slide the holder to the desired position Tighten the 2 bolts to secure the position Illustrations Image 1 6 qwÃW @S Uà ‚†v‡v‚Ã‚sÇurÃyvtu‡Ã†ƒ‚‡Ã‚Ã‡urÂyh…v“r… Image 2 BARCO ——————————————————— 11 ————————————— Projection Systems...
  • Page 12 Horizontal fine To perform a fine adjustment, follow the next procedure: adjustment Step Action Image Turn the indicated screw to shift the polarplate A. Turning clockwise shifts the plate to the right. Illustrations image 1 BARCO ——————————————————— 12 ————————————— Projection Systems...
  • Page 13 Loosen 1 or both bolts A depending on the required correc- tion. Skew the holder to the desired position by turning the 1&2 screws B. Tighten the bolt(s) A to secure the position Illustrations Image 1 6qwˆ†‡€ r‡Ã‡vy‡vtÂsÇurÃyvtu‡Ã†ƒ‚‡Ã‚Ã‡urÂyh…v“r… Image 2 BARCO ——————————————————— 13 ————————————— Projection Systems...
  • Page 14 Image 1 shows the operation on the projector, image 2 shows it on a removed frame. Necessary Tools none Illustrations Image 2 Image 1 Caution Once the foil removed do not touch the polar glass with your fingers as this may affect the image quality. BARCO ——————————————————— 14 ————————————— Projection Systems...
  • Page 15 Rotate the glass (do not flip the glass, the same side must face the projector) Put the glass back in the frame Place the interior frame place and tighten the screws Illustrations image1 image 2 To be continued on next page BARCO ——————————————————— 15 ————————————— Projection Systems...
  • Page 16 OSEM glass switching (Continued) Illustrations image 3 image 4 BARCO ——————————————————— 16 ————————————— Projection Systems...