Haier HCR2250ADS Installation Instructions Manual page 14

3-WIRE CONNECTION
Frame grounded to neutral of appliance through a link
Grounding through the neutral conductor is prohibited for new
branch-circuit installations (1996 NEC); mobile homes; and recreational
vehicles, or in an area where local codes prohibit grounding through the
neutral conductor. For installations where grounding through the
neutral conductor is prohibited, see the Ungrounded Neutral graphic.
Disconnect the ground from the neutral at free end of conduit.
Use grounding terminal or lead to ground unit.
Connect neutral terminal or lead to branch circuit neutral in usual
manner.
Failure to do so could result in death, re or electric shock.
Where local codes allow the connection of GROUND wire from the oven to the
branch circuit NEUTRAL wire (gray or white colored wire):
•
If local codes permit, connect the green GROUND wire from the oven and the
white wire from the oven to the branch circuit NEUTRAL wire (gray or white
colored wire).
•
Connect the red and black leads from the oven to the corresponding leads in the
junction box.
12
WARNING
Electrical Shock Hazard