Multipoint Connection - Phiaton BT 330 NC Owner's Manual

3) Checkpoints Upon Pairing
- Check to see whether the Bluetooth feature is activated within the 'Bluetooth Device' you want to connect.
- When selecting the connection device, connect by selecting stereo headset device.
Music cannot be played when connected through mono headset.
※ In order to properly use the Bluetooth feature of this device, the profile (A2DP, HSP, HFP and AVRCP) of the 'Bluetooth
Device' you are trying to connect must support the profile of this device.
* A2DP–"Advanced Audio Distribution Profile", HSP–"Headset Profile", HFP–"Hands Free Profile".
AVRCP–"Audio/Video Remote Control Profile"
※ The device will not operate properly if the profiles are not supported equally. Even when the profiles are supported equally,
some features may not properly operate depending on the 'Bluetooth Device' specifications. To check the detail
specifications of this headphone's profile, refer to '16.SPECIFICATIONS'. For more information, please visit phiaton.com or
contact Phiaton customer service.

6. MULTIPOINT CONNECTION

1) What is 'Multipoint Connection'?
- This is a feature where BT 330 NC's user can simultaneously connect two Bluetooth devices.
2) Multipoint Connecting
- Turn on the Bluetooth feature within the two 'Bluetooth Devices' you want to connect with BT 330 NC.
- Refer to 5. PAIRING WITH A 'BLUETOOTH DEVICE' to pair the first device with the BT 330 NC.
- Press and hold the CALL Button again for 2.5 seconds to enter 'Pairing Mode'.
(Here, the first device becomes disconnected.)
- Once 'Pairing Mode' has been entered, pair the second device.
- Within the first 'Bluetooth Device' you want to connect, select 'BT 330 NC' again.
- Now, both of the 'Bluetooth Devices' will be connected simultaneously, and now the 'BT 330 NC' will control the
secondly paired device.
※ Sleep Mode will be entered when devices are not connected within two minutes. When trying to connect a device while in
Sleep Mode, pressing any button will re-enter 'Connection Waiting Mode' where connection is possible.
※ When the BT 330 NC power is turned off and back on, only the second paired device will automatically be connected.
When the first paired device is reconnected, then both of the devices will remain connected.
2
1
2
1
2
1
7