Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Phiaton BonoBuds
Summary of Contents for Phiaton BonoBuds
-
Page 2: Table Of Contents
- Please keep the owner’s guide for future reference. - Some functions of the PHIATON BonoBuds may not be available when it is paired with certain devices. - The specifications are subject to change without prior notice for quality improvement. -
Page 3: Safety And General Information
13) To clean the silicone eartips, remove from earphones, wash with warm water, dry completely and check for debris before reattaching. 14) Replacement ear tips can be purchased from PHIATON Customer Service. 15) Using the device while walking or driving may prevent the user from hearing important sounds such as signals or alarms and may impose hazardous conditions on yourself and/or others. -
Page 4: Package Contents
2. Package Contents 1) Package Contents - BonoBuds Earbuds - BonoBuds Charging Case - 3 Sizes of Silicon Ear Tips (M Silicone tips come pre-attached.) - USB - C Type Cable - Quick Guide - Warranty Card - -Extend Warranty Card... -
Page 5: Pairing
② When earbuds is taken out of the case, the earbuds are automatically turned on and ready for pairing after 5 seconds. ③ After searching for a device in ‘Bluetooth Settings’ of the device to be connected, select ‘PHIATON BonoBuds’ to complete pairing. -
Page 6: Charging
4. Charging The earbuds begin charging from the moment they are stored in the case. Case supports USB Type C charging 4-1. Charging the Earbuds ① Earbuds start charging when you put them in the case. ② The LED on the earbuds turns on and the earbuds are charging. ※... -
Page 7: Power On/Off The Earbuds
4-3. Checking Battery Level Check the earbuds battery level When the battery level is less than 10%, the earbuds red LED blinks twice every 5 seconds. When the remaining battery power is low, voice guidance is provided every 5 minutes. ‘Battery is low’ Check the case battery level When you open the case, you can check the charge level through the ‘Case Charge Status LED’. - Page 8 2) Turning off the earbuds When you put the earbuds in the ‘case’, the earbuds automatically turn off. ※ You can turn on/off the earbuds only when there is remaining battery power in the case. Turn on/off earbuds manually. Press and hold the earbuds touch part for 5 seconds to turn on the power and provide voice guidance. ‘Power On’ If you press the touch part again for 5 seconds, the power is turned off and voice guidance is provided.
-
Page 9: Managing Music (Play & Control)
⑤ When earbuds is taken out of the case, the earbuds are automatically turned on and ready for pairing after 5 seconds. ⑥ After searching for a device in ‘Bluetooth Settings’ of the device to be connected, select ‘PHIATON BonoBuds’ to complete pairing. -
Page 10: Call Function
8. Call Function If you receive a call while using, tap the earbuds to answer and end the call. 1) Answering a call Tap earbud twice to accept / end a call. 2) Ending a call When the call is over, double-tap the earbuds to end the call. (In the case of a call received while listening to music, the music will automatically pause and will play again when the call ends.) ※... -
Page 11: Ambient Mode (Audio Transparency)
10. Ambient mode (Audio Transparency) ① Ambient mode Allowance is a function that allows you to hear ambient sounds without removing the earbuds from your ears while the noise canceling function is in operation. ② If you press and hold the touch part of the right earbud for 2 seconds, the noise canceling function stops and you can listen to external sounds. -
Page 12: Product Reset
⑧ When earbuds is taken out of the case, the earbuds are automatically turned on and ready for pairing after 5 seconds. ⑨ After searching for a device in ‘Bluetooth Settings’ of the device to be connected, select ‘PHIATON BonoBuds’ to complete pairing. -
Page 13: Specifications
13. Specifications Communication Network Bluetooth Version 5.2 Bluetooth Profiles A2DP 1.3.2, HFP 1.8 , HSP 1.2 , AVRCP 1.6.2 Audio Codec SBC, AAC Operating Frequencies 2.4GHz(2.402~2.480GHz) Operating Range Within 10m Music Play NC On 6 hrs Standby Time Earbuds : 100hrs / Charging Case : 5000hrs Full Charge Time Earbuds : 1.5hrs / Charging Case : 1.5hrs Earbuds Dimensions (L x W x H) - Page 14 ※ Charging case Dimensions (L x W x H) 32.7mm 70.7mm ※ The specifications are subject to change without prior notice for quality improvement.
-
Page 15: Troubleshooting
Make sure the earbud protection film has been removed. - Charge the device for at least 30 minutes. - If the power does not turn on even after charging, contact PHIATON Customer Service. 2) The device does not charge: Make sure the earbud protection film has been removed. - Page 16 9) The device is paired with a PC/Laptop but does not work: - PC/Laptops are equipped with various Bluetooth drivers depending on the manufacturer. It is possible that the PC/Laptop you are trying to connect is not compatible with ‘PHIATON BonoBuds’...
-
Page 17: Certification
15. Certification FCC Compliance Information FCC ID: V2R-TN0610 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment NOTE :... - Page 18 été testé et jugé conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’ISDE. CE Compliance Information Hereby, PHIATON declares that this product is in compliance with the essential requirements and other relevant provisions of RE Directive 2014/53/EU 2011/65/EU.
Need help?
Do you have a question about the BonoBuds and is the answer not in the manual?
Questions and answers