Pairing With A 'Bluetooth Device - Phiaton BT 330 NC Owner's Manual

5. PAIRING WITH A 'BLUETOOTH DEVICE'

1) Pairing
- Turn on the Bluetooth feature with the 'Bluetooth Device' you want to connect with the BT 330 NC.
- Place the BT 330 NC within 3 feet of the 'Bluetooth Device' you want to connect.
- Press and hold the CALL Button for over 2.5 seconds with the BT 330 NC power on to enter Pairing Mode.
Status
Pairing Mode
- Within the 'Bluetooth Device' you want to connect, search/select 'BT 330 NC'.
※ If the 'Bluetooth Device' requires a PIN CODE or password, enter '0000'.
- Use the headphones to play music or connect a call.
Operation
Connection success
2) Re-connecting a Disconnected Device
① Auto Connection
- Once the device has been paired with a 'Bluetooth Device' it will automatically be connected to a previously
connected device once the BT 330 NC power is turned on.
- If Bluetooth becomes disconnected as the discover range between the 'Bluetooth Device' and the BT 330 NC
is exceeded, then Bluetooth will not be automatically re-connected.
When you are back within the discover range (33 feet), you must then connect manually.
② Manual Connection
- When having entered 'Connection Waiting Mode' during connection.
- Press the CALL Button or the PLAY Button on the headphone to connect.
- The BT 330 NC will also be connected if you select 'BT 330 NC' from the device search list within your
'Bluetooth Device'.
6
3 feet
LED Indicator
Blue and Red light alternately blinks
LED Indicator
After Purple light blinks twice, Blue light
blinks once in 6 second intervals
Press Call Button
for 2.5 Seconds
BT 330 NC
Voice Guidance
Pairing Mode activated
Voice Guidance
Device connected