Is Your Eco Light Blue? - Telstra T-Gateway User Manual

BEFORE YOU BEGIN: IMPORTANT INFORMATION ABOUT WI-FI
Your T-Gateway uses the latest Wi-Fi technology (802.11n) to give you fast wireless
coverage throughout your home.
In order to get optimal Wi-Fi performance, you should try to place your T-Gateway
as centred in your home as possible.
The range and speed you get from devices you connect will depend on a number
of factors, including:
• The wireless capabilities of your device, and its distance,
• The distance of your device from your T-Gateway,
• Other electrical equipment nearby, such as cordless telephones and microwaves,
• Thick walls and other physical obstacles, such as Fish Tanks and large mirrors.
To get the greatest range and speed from your Wi-Fi connection, avoid placing it near
cordless phones operating on the 2.4GHz band (Check your Cordless phone user
manual if unsure).
You can access the T-Gateway Management console anytime by opening a browser
and entering '10.0.0.138' in the address bar of your browser.

IS YOUR ECO LIGHT BLUE?

If the ECO LED is lit up blue, then your T-Gateway Wi-Fi is switched off. Turn it back on
by pressing the ECO button on the front.
DO YOU NEED MORE RANGE?
Your T-Gateway has a strong Wi-Fi signal that can provide most houses with fast
wireless throughput.
If you need more speed at a greater distance, we offer Home Network Extenders.
These boost the signal strength and help it reach further through your house,
or out to your backyard.
Extenders are available for purchase at any Telstra store.
37