Telstra T-Gateway User Manual page 11

1. WPS (Wi-Fi Protected Setup) button
Press this button to activate WPS (see page 80 for an explanation of
WPS LED colours).
2. DECT button
Press this button to pair your T-Hub and/or T-Hub 2 handset
(or other DECT compliant handsets) with your T-Gateway.
3. Telephone port (green)
This port is currently not in use for ADSL services.
4. Telephone port (black)
Connect one of the included grey telephone cables from here to your
'Local Phone' socket on the filter/splitter to allow calls to be made
with any DECT paired handset.
5. Ethernet Ports 1-3 (yellow: Fast Ethernet)
Connect any devices such as computers, smart TV's, T-Hub
T-Box or printers via a cable.
®
6. Ethernet Port 4 (yellow: Gigabit Ethernet or GbE)
Connect any devices such as game consoles or a T-Box for super-fast speeds.
7. Gigabit Ethernet port WAN (red)
This port is to connect your T-Gateway to your Velocity or Telstra on the
NBN service allowing high speed transfer over Fibre networks.
8. Power Socket
Used with the supplied power adaptor in the kit.
9. Power button
This button is to turn your T-Gateway on and off.
10. USB ports (Back port – High Power 1000mA; Side port – Normal Power 500mA)
Connect USB hard drives or printers; or connect a Telstra Mobile Broadband device
for Internet without ADSL on any of the USB ports.
,
®
11