Checking Connection Information - Canon Powershot SX520 HS User Manual

Connection status of Eye-Fi cards in the camera can be checked on the
shooting screen (in regular information display mode) or playback screen
(in simple information display mode).
Not connected
(Gray)
Connecting
(Blinking white)
Connected
(White)
Transfer in progress*
(Animated)
Interrupted
Not communicating
Error acquiring Eye-Fi card information*
Power saving ( = 24) on the camera is temporarily disabled during image
*1
transfer.
*2 Restart the camera. Repeated display of this icon may indicate a problem with
the card.
Images labeled with a [ ] icon have been transferred.
●
Choosing [ ] mode will interrupt the Eye-Fi connection.
Although the Eye-Fi connection will be restored after you choose
another shooting mode or enter Playback mode, the camera may
transfer any movies made in [

Checking Connection Information

Check the access point SSID used by the Eye-Fi card or the connection
status, as needed.
●
Press the [
Fi Settings] on the [
press the [ ] button.
●
Choose [Connection info], and then press
the [ ] button.
●
The connection information screen is
displayed.
1
2
] mode again.
] button, choose [Eye-
] tab, and then
Disabling Eye-Fi Transfer
Configure the setting as follows to disable Eye-Fi transfer by the card, if
necessary.
●
Press the [
Fi Settings] on the [
press the [ ] button.
●
Choose [Eye-Fi trans.], and then choose
[Disable].
●
[Eye-Fi Settings] is not shown unless an Eye-Fi card is in the
camera with its write-protect tab in the unlocked position. For this
reason, you cannot change settings for an inserted Eye-Fi card if
the write-protect tab is in the locked position.
Before Use
Basic Guide
Advanced Guide
] button, choose [Eye-
1
] tab, and then
2
3
4
5
6
7
8
9
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Setting Menu
Accessories
Appendix
118