Table of Contents
Advertisement
Section D:
CRT Interface
0.4.6. Activate Screen Editor
The screen editor enables to edit on the entire screen area,
All cursor
and
other
control functions can be used,
Edit mode is
terminated
by
typing <CR>.
This effects that the complete line in which the cursor is
currently
standing,
will
be returned as an input from
the
keyboard,
terminated
by
<CR>.
The following screen area is erased so
that
the
screen output from the function called is clearly readable.
TV950:
<Ctrl-Y> <n+20H>
or
<ESC> <'N'> <n+20H>
ADM3A:
<Ctrl-Y> <n+20H>
or
<ESC> (
1
9'> <n+20H>
n
denotes
the number of characters at the beginning of the line
which
are to be ignored, e.g. a previous output.
This
function greatly enhances the operating comfort,
especially
with
the EOS ''Line Input'' function.
0.4.7. Monitor Mode
By
<Ctrl-underline> the Monitor mode is toggled between four
different
modes
which
are
effectiv especially in the "Edit Mode"
when
testing
software:
Monitor Mode disabled
full Monitor Mode
CRT Monitor Mode
KBD
Monitor Mode
0,4.8. Screen Hardcopy
all control characters from input and output
are processed in the normal way.
all control characters from 1nput and output
are
not processed,
but displayed as tilted
characters.
only
control characters from
keyboard
are
processed, outputs are monitored.
only
control characters send to the
screen
are
processed,
inputs
from
keyboard
are
monitored.
The screen contents are transferred directly to the printer connected to
the Centronics interface. In TV950 mode, the status line is not printed.
TV950:
<ESC> <
1
P
1
>
ADM3A:
ctrl-W
I
<ESC> <'7
1
>
EOS System manual
Daeumling & Zimmermann
Page 190
Advertisement
Chapters
Table of Contents
