Masking the headlamps
1. Copy the A and B templates for left-hand
drive cars or the C and D templates for
right-hand drive cars, see later section
"Templates for halogen headlamps". The
templates have a scale of 1:2. Use a pho-
tocopier with a zoom function for exam-
ple, and copy the templates at 200 %:
•
A = LHD Right (left-hand drive, right
lens)
•
B = LHD Left (left-hand drive, left lens)
•
C = RHD Right (right-hand drive, right
lens)
•
D = RHD Left (right-hand drive, left
lens)
2. Transfer the template to a self-adhesive
waterproof material and cut it out.
3. Start from the design line on the head-
lamp lenses; see the dotted line in the fol-
lowing figure. Position the self-adhesive
templates at the right distance from each
design line using the illustration and the
dimensions in the following list:
•
A = LHD Right - approx. 86 mm
•
B = LHD Left - approx. 40 mm
•
C = RHD Right - 0 mm
•
D = RHD Left - approx. 96 mm
03 Instruments and controls
03
}}
95