Table of Contents
Advertisement
Related information
•
Adaptive cruise control - ACC* (p. 193)
•
Adaptive cruise control* - function
(p. 194)
•
Adaptive cruise control* - symbols and
messages (p. 206)
Adaptive cruise control* - managing
speed
To start the ACC:
•
Press the steering wheel button
similar WHITE symbol illuminates in the
combined instrument panel (8) which
shows that the adaptive cruise control is
in standby mode (p. 199).
To activate ACC:
•
At the required speed - press the steering
wheel button
or
.
>
The current speed is stored in the mem-
ory, the combined instrument panel
shows a "magnifying glass" (6) around
the stored speed for a second or so and
its marking changes from WHITE to
GREEN.
When this symbol changes colour
from WHITE to GREEN, the ACC is
active and the car maintains the
stored speed.
Only when the symbol shows
an image of another vehicle
is the distance to the vehicle
in front controlled by the
ACC.
07 Driver support
At the same time a speed
range is marked:
- a
•
the higher speed with GREEN marking is
the pre-programmed speed
•
the lower speed is the speed of the vehi-
cle in front.
Changing the stored speed
Stored speed is changed with short or long
presses on the
or
ton.
To adjust +/- 5 km/h:
•
Use short presses - each press gives
+/- 5 km/h.
To adjust +/- 1 km/h:
•
Hold down the button and release it at
the required speed.
Last press made is stored in the memory.
If speed is increased using the accelerator
pedal prior to pressing the
then it is the car's current speed when the
button is pressed that is stored.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the setting - the car returns to the last
*
Option/accessory, for more information, see Introduction.
steering wheel but-
07
/
button,
}}
197
Advertisement
Table of Contents
