Lamp replacement - vanity mirror
lighting
The vanity mirror's lamps are fitted inside the
lamp lenses.
Removal of lamp lens
1. Insert a screwdriver under the lamp lens
and gently prize up the lock lugs on the
edge.
2. Snap off the lamp lens.
3. Use needle-nose pliers to pull the bulb
straight out to the side and replace with a
new one. Note! - Do not pinch hard with
the pliers. Otherwise the lamp lens could
then be crushed.
Attaching the lamp lens
1. Refit the lamp lens.
2. Press it into place.
Related information
•
Lamps - specifications (p. 357)
10 Maintenance and service
Lamps - specifications
The specifications apply to bulbs. When
replacing LED and Xenon lamps, please refer
to a workshop.
Lighting
Dipped beam, hal-
ogen
Main beam, Halo-
gen
Extra main beam,
ABL
Front direction
indicators
Glovebox lighting
Vanity mirror light-
ing
Cargo area light-
ing
Number plate
lighting
Direction indica-
tors, rear
10
Type
W
A
55
H7 LL
65
H9
55
H7 LL
21
H21W LL
5
Socket SV8.5
Length 43 mm
2
T5 Socket
W2x4.6d
5
Socket SV8.5
Length 38 mm
5
C5W LL
21
PY21W SV
}}
357