Table of Contents
Advertisement
Related information
•
Lamp replacement - general (p. 351)
•
Lamp replacement - cover for main/
dipped beam bulbs (p. 353)
•
Lamps - specifications (p. 357)
Lamp replacement - cover for main/
dipped beam bulbs
Main/dipped beam bulbs are accessed by
releasing the headlamp's larger cover.
Before starting to replace a bulb, see Lamp
replacement - headlamps (p. 352).
1. Open the lock clamp by pressing up/out.
2. Press down the clips on the cover and
remove it.
Reinstall the cover in reverse order.
Related information
•
Lamp replacement - headlamps (p. 352)
•
Lamp replacement - dipped beam
(p. 353)
•
Lamp replacement - main beam (p. 354)
•
Lamp replacement - extra main beam
(p. 354)
10 Maintenance and service
Lamp replacement - dipped beam
The dipped beam bulb is fitted inside the
headlamp's larger cover.
NOTE
Applies to cars with halogen headlamps.
1. Detach the headlamp (p. 352).
2. Remove the cover (p. 353).
3. Unplug the connector from the bulb.
4. Detach the bulb by pressing the holder
downwards.
5. Fit the new bulb in the socket and snap it
in. It can only be secured in one position.
Reinstall the parts in reverse order.
Related information
•
Lamps - specifications (p. 357)
10
353
Advertisement
Table of Contents
