Handling The Print Cartridges - Rena XPS-80 User Manual

Tabletop-console printer
Table of Contents

Advertisement

Never touch the print units while the printer is run-
ning! There is a danger of bruising and crushing in-
jury. Also be sure to keep long hair or any items of
clothing away from the printer while it is running.
Protect the printer from moisture.
Always unplug the printer before cleaning it.
Do not use any cleaning agents. Use a damp cloth.
You must unplug the printer and have it checked by
an authorized service technician in the following cir-
cumstances:
If the power cable or power plug has worn or been
damaged.
If water or another liquid has penetrated the printer.
If the printer does not operate properly even after the
operating instructions have been followed.
If one of the printer parts or its housing is damaged.
If the printer shows marked discrepancies from nor-
mal operation.
Do not dismantle the printer beyond the level described in this
manual. Unauthorized persons must not open the housing.
Only authorized service personnel may carry out repairs.
Prohibition of conversions: all conversions or modifications
carried out by unauthorized persons are prohibited for rea-
sons of safety.

2.2 Handling the print cartridges

Keep all print cartridges out of the reach of children.
Under normal circumstances, ink cannot run out of a car-
tridge. Wash off any ink spray, which gets onto the skin im-
mediately under running water. If any ink gets into your eyes,
rinse it out immediately with plenty of water and subsequently
consult a doctor.
Print cartridges must not be shaken, as ink may run out.
Install each print cartridge immediately after removing the
protective tab. Be sure not to exceed the expiry date.
User Guide
RENA XPS-80/90
2-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xps-90

Table of Contents