Table of Contents
Advertisement
3. Unpacking and final assembly
3.1 Shipping and packaging
The XPS-80/90 is shipped in special packaging so that it reaches
its destination without damage via a regular mode of transport.
Note:
The carrier is liable for any damage during transport.
Transport and storage should take place under normal
conditions, i.e. at temperatures between +5°C and +60°C
and relative air humidity of up to 80%. Impermissible con-
ditions may lead to damage which is not externally visible.
The printer is fixed inside the transport box with special securing
blocks. These must be unscrewed before it is taken out. Lift the
printer only at the carrying recesses designed for this purpose. It
must not be lifted by its cladding (side covers)!
Lift the printer only at the carrying recesses!
Remove all ink cartridges before shipping!
User Guide
RENA XPS-80/90
3-1
Advertisement
Table of Contents
