Specifications And Service Log; General Specifications; Fluid Specifications - ILMOR MV8 570 Owner's Manual

Section 11
SPECIFICATIONS AND
SERVICE LOG

GENERAL SPECIFICATIONS

Full Throttle RPM
Range
Displacement
Compression Ratio
Alternator
Engine Controller
Emissions Certification
Standard
Fuel Type
Engine Weight
(including fluids)
Firing Order

FLUID SPECIFICATIONS

Engine
Coolant 5-Year/100,000-mile 50/50
Engine Oil Lucas Oil 20W-50, bottling
date 13086 or later
(shown on bottle label).
Use Mobil 1 20W-50 V-Twin
if Lucas Oil is unavailable.
Power
Steering Fluid
* 9 qt (8.5 L) for an empty system.
Approximately 6 qt (5.6 L) for an oil change.
** 10 qt (9.46 L) for an empty system.
Approximately 8.5 qt (8.04 L) for an oil change.
NOTE: Always use the dipstick for proper oil level measurement.
Ilmor High-Performance Marine, LLC
© 7/2013, Version 1.0
MV8 570
5,600–6,000
(6,200 rpm limit)
454 cu. in. (7.4 L)
10.7:1
95 amp
4th Gen. E-Controls
U.S. EPA – CARB 3-Star Ultra-Low Emissions
830 lb (377 kg)
1-8-7-2-6-5-4-3
MV8 570
Type
Sierra Brand
Mix
Synthetic ATF
MV10 650
5,600–6,100 rpm
(6,300 rpm limit)
511 cu. in. (8.4 L)
and EU RCD (CE) certified
91 Octane (R+M)/2
(95 RON)
1-10-9-4-3-6-5-8-7-2
Capacity
2.125 gal 5-Year/100,000-mile
(8 L) 50/50 Mix
9 qt 0W-40 Mobil 1
(8.5 L)* Synthetic
Boat specific Synthetic ATF
MV10 725
5,800–6,300 rpm
(6,400 rpm limit)
10.4:1
160 amp
ICE system
810 lb (367 kg)
MV10 650
MV10 725
Type Capacity
4 gal
(15.14 L)
10 qt
(9.46 L)**
Boat specific
11-1