Progear Fitness 1017 Owner's Manual page 14

ASSEMBLY
Tool:
Allen Wrench with Phillips
Screwdriver
Step 2
Connect the Hand Pulse Sensor Wire (#63) from the Handlebar (#61) to the
Extension Hand Pulse Sensor Wire (#62) from the Handlebar Support Tube
(#29). Then attach the Handlebar (#61) onto the right side of the Handlebar
Support Tube (#29) with one Bolt (#55), two Bolts (#43), and three Curve
Washers (#19). Tighten bolts with the Allen Wrench with Phillips Screwdriver
provided. Repeat above step to attach the other Handlebar (#61) onto the left
side of the Handlebar Support Tube (#29).
Hardware:
(#19) Curve Washer (#43) Bolt (#55) Bolt
4 PCS 2 PCS
6 PCS
13