Scanning
Install and program the digital scanner (see
or the Motorola Solutions Global Customer Support Center.
Aim the digital scanner at the bar code.
1.
Scanning in Hand-Held Mode
Figure 2-1
Hold the trigger until the digital scanner beeps, indicating the bar code is successfully decoded. For more
2.
information on beeper and LED definitions, see
Aiming
When scanning, the digital scanner projects a red laser aiming pattern which allows positioning the bar code within
its field of view. See
and a bar code.
Imager Aiming Pattern
Figure 2-2
If necessary, the digital scanner turns on its red LEDs to illuminate the target bar code.
Chapter 1, Getting
Decode Ranges on page 2-7
Started). For assistance, contact the local supplier
Table 2-1
and
Table
2-2.
for the proper distance to achieve between the digital scanner
Scanning
2 - 5