Motorola Symbol DS3578 Product Reference Manual page 152

On first installation when using Windows, the software displays a prompt to select or install the Human
6.
Interface Device driver. To install the Human Interface Device driver provided by Windows, click
all the choices and click
To modify any other parameter options, scan the appropriate bar codes in this chapter.
7.
Connect an external power supply if desired.
8.
NOTE Interface cables vary depending on configuration. The connectors illustrated in
only. The connectors may be different from those illustrated, but the steps to connect the cradle remain
the same.
NOTE Disconnect the power supply before changing host cables or the scanner may not recognize the new host.
If problems occur, see Troubleshooting on page
on the last choice. The scanner powers up during this installation.
Finished
3-2.
USB Interface 8 - 3
through
Next
Figure 8-1 are examples