To Remove Left And Right Panels - Ravenheat CS 80 T Instructions For Use Installation And Servicing

8.3

TO REMOVE LEFT AND RIGHT PANELS

(Fig. 40)
Remove the front panel (fig. 39). Remove the front panel (fig. 39).
Unscrew the four screws to the bottom Unscrew the four screws to the bottom
panel. panel.
Unscrew the two screws to the side panel Unscrew the two screws to the side panel
and pull. and pull.
8.4 TO REMOVE/REPLACE SPARK
IGNITER BOX (Fig. 41)
Remove the front panel (fig. 39).
Detach all the connectors from the igniter
control box.
Remove the 2 screws that secure the spark
igniter to the bracket.
Replace in reverse order.
Fig.41
8.5 TO REMOVE/REPLACE FAN
(Fig. 42)
Remove the front panel (fig. 39).
Unscrew the gas pipe nut and remove
the retaining clip. Detach the connectors the retaining clip. Detach the connectors
from the fan. from the fan.
Unscrew the four screws that fix the fan Unscrew the four screws that fix the fan
and remove only the right screws. and remove only the right screws.
Pull the fan to the right and pull forward. Pull the fan to the right and pull forward.
Replace in reverse order (always fitting a Replace in reverse order (always fitting a
new gasket). new gasket).
46
Fig.42
Fig.40