Ravenheat CS 80 T Instructions For Use Installation And Servicing page 36

5.18 INSTALLATION INSTRUCTIONS FOR CONCENTRIC 80/125 FLUE SYSTEM
The vertical 80/125 flue kit is intended for use
where a horizontal 60/100 flue outlet is not
possible or desired.
The vertical flue can be installed on either a flat
roof or a pitched roof (maximum pitch 60°). roof or a pitched roof (maximum pitch 60°).
Where a straight vertical flue is not possible or Where a straight vertical flue is not possible or
desired, an offset vertical flue can be used in desired, an offset vertical flue can be used in
conjunction with a side horizontal flue extension conjunction with a side horizontal flue extension
piece and an inline 135°/90° flue bend (fig. 27). piece and an inline 135°/90° flue bend (fig. 27).
IMPORTANT:
- See fi g. 6 for terminal clearances. See fi g. 6 for terminal clearances.
IMPORTANT NOTICE:
When using our vertical fl ue kit the 125 mm x 100 reducer is supplied
complete with the vertical terminal simply remove this and fi x it into
the straight fl ue header (which must be fi tted) on the top of the boiler.
Straight Flue
L = 25 m Max
plus Terminal
NOTE : If using Flue arrangement in fi g. 27 then the 125x100 Flue reducer
TABLE 9
Part No
PR5094110A
PRO110300
RID110050
CUR110250
CUR110300
TER010050
TER110200
TEG060050
36
installed on either a flat
Straight Flue
L = 20 m Max
plus Terminal
must be purchased separately.
Description
Straight fl ue header / sample point
60/100
Flue Extension 80/125 L1000
125/80 to 100/60 Flue reducer
45° fl ue bend 80/125
90° elbow fl ue bend 80/125
Horizontal Flue Terminal 80/125
Vertical Flue Terminal 80/125
Flashing sleeve/slate
Fig. 27
Fig. 28
90° Offset Flue
L = 20 m Max
plus Terminal
IMPORTANT: Please lubricate the
internal part of the seals before
fitting.
Available on request from: Available on request from:
RAVENHEAT MANUFACTURING LTD RAVENHEAT MANUFACTURING LTD
Chartists way, Morley, Leeds, West Yorkshire Chartists way, Morley, Leeds, West Yorkshire
ENGLAND LS27 9ET - U.K. ENGLAND LS27 9ET - U.K.
Tel: 0113 252 7007 Tel: 0113 252 7007
L + L = 23.5m Max
135° Offset Flue
L = 22.5m Max
plus Terminal