Ravenheat CS 80 T Instructions For Use Installation And Servicing page 30

SIDE FLUE OUTLET
All joints must be sealed with the rubber seals
supplied.
It is important to put the centering spacer, supplied
with the unit, inside between the two pipes, from
the side opposite the extension's straight end.
NOTE: A suitable support bracket (flue bracket)
is available from Ravenheat and should be used
to support the flue length at least every one
metre preferably at each joint this bracket should
be secured to wall and flue duct.
30
NOTE: The position of the appliance must provide
minimum side clearances of 5 mm as the
side panels.
Fig. 14
Fig. 15