Figure 3-59 Strobe Warning Signal; Figure 3-60 Trouble Signals; Figure 3-61 Buzzer Trouble Signal; Figure 3-62 Horn Trouble Signal - Macurco DVP-120 Installation & Operating Instructions Manual

This display example shows that the strobe will not signal a warning condition. The signal definitions are:
–
–
–
–
–
3.3.8.9 Trouble Signal Summary
The trouble signals are in response to one or more sensor faults, either as a defined current level, or because of
wiring problems
This display example shows that troubles are signaled by the internal Buzzer only.
3.3.8.10 Trouble Buzzer Signal
This display example shows that the buzzer will signal a trouble condition with a triple tap signal. The signal
definitions are:
–
–
–
–
–
3.3.8.11 Trouble Horn Signal
This display example shows that the horn will not signal a trouble condition. The signal definitions are:
–
–
–
–
–
Revision 0.07
S t r o b e : 5

Figure 3-59 Strobe Warning Signal

1 Continuous
2 Intermittent, one second on at two second intervals
3 Double Tap, two beeps at 5 second intervals
4 Triple Tap, three short beeps at 15 second intervals
5 Off, strobe will not flash (default)
T r o u b l e
B u z z

Figure 3-60 Trouble Signals

T r o u b l e
B u z z : 4

Figure 3-61 Buzzer Trouble Signal

1 Continuous
2 Intermittent, one second on at two second intervals
3 Double Tap, two beeps at 5 second intervals
4 Triple Tap, three short beeps at 15 second intervals (default)
5 Off, buzzer will not sound
T r o u b l e
H o r n : 5

Figure 3-62 Horn Trouble Signal

1 Continuous
2 Intermittent, one second on at two second intervals
3 Double Tap, two beeps at 5 second intervals
4 Triple Tap, three short beeps at 15 second intervals
5 Off, horn will not sound (default)
O F F
S i g n a l s
S i g n a l s
T r i p l e
S i g n a l s
O F F
34