Figure 3-55 Strobe Alarm Signal; Figure 3-56 Warning Signals; Figure 3-57 Buzzer Warning Signal; Figure 3-58 Horn Warning Signal - Macurco DVP-120 Installation & Operating Instructions Manual

3.3.8.4 Alarm Strobe Signal
This display example shows that the strobe will signal an alarm condition with a continuous signal. The signal
definitions are:
–
–
–
–
–
3.3.8.5 Warning Signal Summary
The warning signals are in response to one or more sensors indicating gas levels at or above the sensors'
configured warning level.
This display example shows that warnings are signaled by the internal Buzzer only.
3.3.8.6 Warning Buzzer Signal
This display example shows that the buzzer will not signal a warning condition. The signal definitions are:
–
–
–
–
–
3.3.8.7 Warning Horn Signal
This display example shows that the horn will not signal a warning condition. The signal definitions are:
–
–
–
–
–
3.3.8.8 Warning Strobe Signal
Revision 0.07
A l a r m
S t r o b e : 1

Figure 3-55 Strobe Alarm Signal

1 Continuous (default)
2 Intermittent, one second on at two second intervals
3 Double Tap, two beeps at 5 second intervals
4 Triple Tap, three short beeps at 15 second intervals
5 Off, strobe will not flash
W a r n i n g
B u z z

Figure 3-56 Warning Signals

W a r n i n g
B u z z : 5

Figure 3-57 Buzzer Warning Signal

1 Continuous
2 Intermittent, one second on at two second intervals
3 Double Tap, two beeps at 5 second intervals
4 Triple Tap, three short beeps at 15 second intervals
5 Off, buzzer will not sound (default)
W a r n i n g
H o r n : 5

Figure 3-58 Horn Warning Signal

1 Continuous
2 Intermittent, one second on at two second intervals
3 Double Tap, two beeps at 5 second intervals
4 Triple Tap, three short beeps at 15 second intervals
5 Off, horn will not sound (default)
W a r n i n g
S i g n a l s
C o n t i n .
S i g n a l s
S i g n a l s
O F F
S i g n a l s
O F F
S i g n a l s
33