Charging The Battery Using A Battery Charger - PEUGEOT ION Handbook

Hide thumbs Also See for ION:
Table of Contents

Advertisement

Practical information
Start the other vehicle and wait a few
minutes.
Turn the ignition key on your vehicle, until
the "Ready" lamp comes on.
Disconnect the cables in the reverse order.
Refit the battery protective cover and
tighten the fixing screw.
If the "Ready" lamp does not come on, proceed
as follows:
Leave the cables connected.
Return the ignition switch on your vehicle to
the " LOCK" position.
Put the main battery on charge, following
the procedure for normal charging (see the
"charging the main battery" section).
When the charging warning lamp in
the instrument panel comes on fixed,
disconnect the cables.
Leave the battery on charge for at least
one hour.
Turn the ignition key on your vehicle, until
the "Ready" lamp comes on.
If the problem persists, contact a
PEUGEOT dealer or a qualified workshop.
90
Charging the battery using
a battery charger
Remove the protective cover from the
battery.
Ensure that the electrolyte is not frozen.
Check the electrolyte level and top up
with distilled water if necessary (refer to
the "checking levels" section).
Slacken nut 1 and lift off the retaining bar.

Advertisement

Table of Contents
loading

Table of Contents