PEUGEOT ION Handbook page 69

"ISOFIX" mountings
Your vehicle has been approved in accordance
with the new ISOFIX regulation .
The seats, represented below, are fitted with
regulation ISOFIX mountings:
There are three rings for each seat:
- two rings A located in the angle between
the vehicle seat's cushion and backrest,
indicated by a label.
- a ring B for securing the upper strap called
the TOP TETHER, located in the boot.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats are fitted with two
latches which are secured on the two rings A.
Some seats also have an upper strap which is
secured to the ring B.
To attach this strap, remove the head restraint
from the vehicle's seat. Attach the hook to the
ring B , then tighten the upper strap.
The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
For information regarding the ISOFIX child
seats which can be installed in your vehicle,
refer to the table showing the locations for
installing ISOFIX child seats.
Child safety
6
67