Changing A Fuse - PEUGEOT ION Handbook

Changing a fuse

Access to tools
the fusebox cover in the dashboard (left hand
side).
For access:
Unclip the cover and remove it completely
by pulling it towards you.
Remove the tweezer.
Changing a fuse
Good
Before changing a fuse, the cause of the failure
must be identified and rectified.
Check that the ignition switch is in the
"LOCK" position.
Identify the faulty fuse by checking the
condition of its filament.
Use the special tweezer to extract the fuse
from its location.
Always replace the faulty fuse with a fuse
of the same rating.
Check that the number etched on the box,
the rating etched on the top and the tables
below all agree.
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories in your
vehicle, contact a PEUGEOT dealer or
a qualified workshop.
Failed
PEUGEOT will not accept responsibility
for the cost incurred in repairing your
vehicle or for rectifying the malfunctions
resulting from the installation of
accessories not supplied and not
recommended by PEUGEOT and
not installed in accordance with its
instructions, in particular when the
consumption of all of the additional
equipment connected exceeds
10 milliamperes.
Practical information
8
107