PEUGEOT ION Handbook page 95

Refi tting the rear seat cushion
Put the metal cover back into place.
Refit the four "butterfly" screws.
Insert the metal hooks into the seat
backrest.
Fold the seat cushion down until it locks in
place.
When refitting the cushion, take care
not to trap the seat belt buckles.
Composition of the kit
1. 12 V compressor with integral pressure
gauge, to measure and adjust the tyre
pressure.
Practical information
2. Sealant cartridge for the temporary repair
of a tyre.
3. Injection pipe.
4. Suction pipe, to remove the sealant product
if necessary.
5. Sachet containing a replacement valve
core, a tool for removing/refitting the valve
core and a speed restriction sticker.
The speed restriction sticker must be
affixed to the vehicle's steering wheel to
remind you that a wheel is in temporary
use.
Do not exceed a speed of 50 mph (80 km/h)
when driving with a tyre repaired using this
type of kit.
8
93