Bonnet; Checks Bonnet - PEUGEOT ION Handbook

Checks

Bonnet

Protects the components in the front compartment and provides access for checking levels, charging the 12 V ancillaries battery, changing fuses, ...
Opening
Open the front right door.
Pull the interior release lever A , located at
the bottom of the door aperture.
Push the exterior safety catch B to the left
and raise the bonnet.
116
Open the bonnet fully and on the right,
unclip the stay C from its holder.
Fit the stay C in one of the two notches to
hold the bonnet open.
The location of the interior release lever
prevents opening of the bonnet while
the front right door is closed.
Closing
Take the stay out of the support notch.
Clip the stay in its housing.
Lower the bonnet and release it at the end
of its travel.
Pull on the bonnet to check that it is fully
latched.
Do not press down on the middle of
the bonnet if it does not fully close, as
there is a risk of deforming it. Open the
bonnet fully and close it again.