ZyXEL Communications Prestige 642 User Manual page 36

Prestige 642 ADSL Modem
Field
Bridge
Ethernet Addr Timeout
(min)
VPI#
VCI#
Filter Sets:
Input Device Filters=
Output Device Filters=
Once you have completed filling in Menu 11.1 – Remote Node Profile, press [Enter] at the message
[Press ENTER to Confirm...] to save your configuration, or press [Esc] at any time to cancel.
4-4
Description
In this field, enter the time (number of minutes) that you wish
your Prestige 642 to retain the Ethernet Addr information in
its internal tables while the line is down. If this information is
retained, your Prestige 642 will not have to recompile the
tables when the line is brought back up.
Enter the Virtual Path Identifier (VPI) number that your
telephone company supplies.
Enter the Virtual Channel Identifier (VCI) number that your
telephone company supplies.
Specify the filter set(s) to apply to the incoming and outgoing
traffic between this remote node and the Prestige. You can
specify up to 4 filter sets separated by comma, e.g., 1, 5, 9,
12, in each filter field. The default is no filters. Note that
spaces are accepted in this field. For more information on
defining the filters, see Error! Reference source not found.
on Filter Configuration.
Specify the incoming filter sets here.
Specify the outgoing filter sets here.
Options
Remote Node Configuration