Table of Contents
Advertisement
Maintaining your locomotive
Adding fluid to your locomotive's smoke generator
Y
our locomotive is equipped with a smoke generator that produces safe, clean white smoke dur-
ing operation.
The smoke generator requires the periodic addition of Lionel smoke fluid in order to function.
Pierce the tube end with a pin, then add four to eight drops of fluid directly into the locomotive's
stack. Smoke production will commence momentarily, faster if you run your locomotive at speed.
When smoke production wanes, add more fluid (four to eight drops).
If you prefer to have a smoke free locomotive, there is a switch located on the bottom of the
engine under the cab (see page 6 for location). Move the switch to off and your locomotive will stop
smoking.
When the smoke unit is on always keep a small amount of smoke fluid in the locomotive's
smoke generator; the generator's element can become damaged if operated without fluid. Smoke
production is greater at higher voltages and when the locomotive is pulling a heavy load or long
consist.
10
Advertisement
Table of Contents
