Table of Contents
Advertisement
Escape 1400 Insert Installation and Operation Manual
50
Align
the
notch
faceplate extension with the
bolt (O) welded to the air
jacket located and slide the
faceplate assembly just over
the washer (P) and bolt's head
(Q). Then push towards the
fireplace.
If necessary, adjust the height
of the insert using the leveling
bolts on each side of the
convection air jacket until the
faceplate is properly seated on
the
floor
of
the
extension.
Once the faceplate is in place,
secure
the
assembly
tightening nut (Q) using a
7/16" (11 mm) open end
wrench.
in
the
hearth
by
Hide quick links:
Advertisement
Table of Contents
