Drolet Escape 1400 Installation And Operation Manual page 36

Escape 1400 Insert Installation and Operation Manual
When installed as an extended insert, the front edge of the air jacket will be installed flush
with the fireplace facing. Otherwise the unit can be moved back as much as 1 3/4" (44 mm)
or any position in between. The position chosen will depend on your own preference for
most installations, your current configuration, the compliance with the preceding installation
instructions and compliance with the building code requirements.
minimum and maximum projection of the insert, refer to table Data for floor protection
calculation.
MAXIMUM
EXTENDED
INCHES
Dimension of
MILLIMETRES
MINIMUM
EXTENDED
INCHES
Dimension of
MILLIMETRES
36
Data for Floor Protection Calculation
B
A
(Note 1)
CAN: 18"
USA: 16"
the hearth
CAN: 457 mm
extension
USA: 406 mm
B
A
(Note 1)
CAN: 18"
USA: 16"
the hearth
CAN: 457 mm
extension
USA: 406 mm
C D
3 1/16" D = B - (A - C)
77 mm D = B - (A - C)
C D
4 13/16" D = B - (A - C)
121 mm D = B - (A - C)
To determine the
AIR
E
JACKET
7 7/8"
Flush
with
fireplace
201 mm
facing
AIR
E
JACKET
Back
6 1/8"
from
fireplace
facing
156 mm
1 3/4" or
44 mm