Simrad AP70 Installation Manual page 75

SI80
Analog current control
of rudder/thruster
Proportional
directional control of
rudder/thruster
"Engage" output for
bypass/clutch
"Ready" output for
rudder/thruster
Rudder angle,
frequency input
Rudder angle or
remote FU/DP, voltage
input
Rudder angle or
remote FU/DP, current
input
External
open/close
NFU port/stbd input contact,
and mode indicator common
output ret, contact
current
max 30 mA
Mode input
Specifications | AP70/AP80 Installation manual
AC70
N/A N/A
N/A N/A
12/24 V DC, min
N/A
10 mA, max 3 A
N/A N/A
15 V (out), 1.4 to
5 kHz, resol. 20
N/A
Hz/°, center 3.4
KHz
N/A N/A
N/A N/A
External open/
close contact,
common ret,
contact current
max 30 mA
External open/
close or pulse
contact for
SYSTEM SELECT,
N/A
common ret,
close to activate,
contact current
max 30 mA
SD80 AD80
N/A 4-20 mA
Solenoid control
for direction,
N/A
"Engage" output
for speed
Externally
supplied 12/24
V DC on/off or
proportional,
min load 10 mA,
N/A
max load 3 A,
superimposed
dither 0-10%
amplitude, off or
70-400 Hz
Max load 100 mA, 32 V DC, sw and
watchdog controlled, galvanic
isolated (closed = ready), polarity
independent
15 V (out), 1.4 to 5 kHz, resol.
20 Hz/°, center 3.4 kHz
Ranges ±5 V, ±10 V, 0-5 V, 0-15 V
4-20 mA
N/A N/A
External open/close or pulse
contact for SYSTEM SEL, STBY,
AUTO, TRACK, common ret, close
to activate, contact current max
30 mA
| 75