Backup & Restore Settings - Foscam FI8918E User Manual

CAUTION: If your camera works well with the current firmware, we recommend not upgrading.
Please don't upgrade the firmware unnecessarily. Your camera may be damaged if
misconfigured during an upgrade.
NOTE:
1) Please ensure you have download the correct firmware package for your camera before
upgrading. Read the upgrade documentation (readme.txt file) in the upgrade package before you
upgrade.
2)Upon downloading the firmware check the sizes of the .bin files. They must match the size in
the readme.txt file. If not, please download the firmware again until the sizes are the same. Your
camera will not function correctly if a corrupt .bin file is used.
3) Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device
Firmware.
4) Never shut down the power of the camera during upgrade until the IP camera restart and get
connected.
3.17 Backup & Restore Settings
Click Submit to save all the parameters you have set. These parameters will be stored in a bin
file for future use. The bin file can be reloaded to restore the parameters that were set.
Shenzhen Foscam Intelligent
Shenzhen Foscam Intelligent
Tel: Tel: 86 86 755 755 2674 2674 5668 5668 Fax: Fax:
Figure 3.49
Technology Co., Limited
Technology Co., Limited
86 86 755 755 2674 2674 516 516 8 8
w ww.foscam.co
w ww.foscam.co
Enter the User name and
password .
m
m
46