Wireless Settings; Adsl - Foscam FI8918E User Manual

Http Port: The default Lan port is 80.You can set another port number, such as port 8005,
8100.etc.
User&Password: Default administrator user name is admin with no password.
NOTE:
If the prompt "Subnet doesn't match, dbclick to change!" appears, please enable DHCP set
camera's IP address and gateway once again.

3.7 Wireless Settings

The network camera is POE-compliant, allowing transmission of power and data via a single
network cable, so here cannot allow to use Wireless function.

3.8 ADSL

If you are connecting the camera directly to a ADSL modem, you can do ADSL settings with your
ADSL account &password provided by the ISP, then make the camera connected to the network.
Shenzhen Foscam Intelligent
Shenzhen Foscam Intelligent
Tel: Tel: 86 86 755 755 2674 2674 5668 5668 Fax: Fax:
Figure 3.19
Figure 3.20
Technology Co., Limited
Technology Co., Limited
86 86 755 755 2674 2674 516 516 8 8
w ww.foscam.co
w ww.foscam.co
Enter the ADSL user
and password .
m
m
26