Lexus ES300h Owner's Manual page 95

System check display
■
After turning the power switch to ON mode, opening image is displayed while system
operation is checked. When the system check is complete, the normal screen will return.
Suspension of the settings display
■
In the following situations, the settings display using the meter control switches will be
suspended.
When a warning message appears on the multi-information display
●
When the vehicle begins to move
●
Tire inflation pressure
■
It may take a few minutes to display the tire inflation pressure after the power switch is
●
turned to ON mode. It may also take a few minutes to display the tire inflation pressure
after inflation pressure has been adjusted.
"---" may be displayed if the tire information cannot be determined due to unfavorable
●
radio wave conditions.
Tire inflation pressure changes with temperature. The displayed values may also be dif-
●
ferent from the values measured using a tire pressure gauge.
When disconnecting and reconnecting 12-volt battery terminals
■
The drive information will be reset.
Liquid crystal display
■
P. 89
WARNING
Caution for use while driving
■
For safety, avoid operating the meter control switch while driving as much as possible,
and do not look continuously at the multi-information display while driving. Stop the
vehicle and operate the meter control switch. Failure to do so may cause a steering
wheel operation error, resulting in an unexpected accident.
Cautions during setting up the display
■
As the hybrid system needs to be operating during setting up the display, ensure that
the vehicle is parked in a place with adequate ventilation. In a closed area such as a
garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter
the vehicle. This may lead to death or a serious health hazard.
NOTICE
During setting up the display
■
To prevent 12-volt battery discharge, ensure that the hybrid system is operating while
setting up the display features.
ES300h_OM_OM33B71U_(U)
2. Instrument cluster
95
2