Lexus ES300h Owner's Manual page 552

552
9-1. Specifications
Tire related term
Rim width
Vehicle capacity weight
(Total load capacity)
Vehicle maximum load on
the tire
Vehicle normal load on the
tire
Weather side
Bead
Bead separation
Bias ply tire
Carcass
Chunking
Cord
Cord separation
Cracking
CT
Extra load tire
Groove
Innerliner
ES300h_OM_OM33B71U_(U)
Meaning
Nominal distance between rim flanges
The rated cargo and luggage load plus 150 lb. (68 kg)
times the vehicle' s designated seating capacity
The load on an individual tire that is determined by dis-
tributing to each axle its share of the maximum loaded
vehicle weight, and dividing by two
The load on an individual tire that is determined by dis-
tributing to each axle its share of curb weight, accessory
weight, and normal occupant weight (distributed in
*
accordance with Table 1 below), and dividing by two
The surface area of the rim not covered by the inflated
tire
The part of the tire that is made of steel wires, wrapped
or reinforced by ply cords and that is shaped to fit the
rim
A breakdown of the bond between components in the
bead
A pneumatic tire in which the ply cords that extend to
the beads are laid at alternate angles substantially less
than 90 degrees to the centerline of the tread
The tire structure, except tread and sidewall rubber
which, when inflated, bears the load
The breaking away of pieces of the tread or sidewall
The strands forming the plies in the tire
The parting of cords from adjacent rubber compounds
Any parting within the tread, sidewall, or innerliner of
the tire extending to cord material
A pneumatic tire with an inverted flange tire and rim
system in which the rim is designed with rim flanges
pointed radially inward and the tire is designed to fit on
the underside of the rim in a manner that encloses the
rim flanges inside the air cavity of the tire
A tire designed to operate at higher loads and at higher
inflation pressures than the corresponding standard tire
The space between two adjacent tread ribs
The layer(s) forming the inside surface of a tubeless tire
that contains the inflating medium within the tire